User manual LG CP06E10

[. . . ] For example, the phone is not allowed to be used in hospital because pacemakers and hearing aids can be affected. Minor interference may affect TVs, radios, PCs, etc. Do not hold the phone in your hand while driving. Do not dismantle phone or battery. Keep the phone in a safe place out of children's reach since it contains the detachable small parts and create a choking hazard. ENGLISH Do not touch the charger with wet hands. 4 For your safety, use ONLY specified ORIGINAL batteries and chargers. Please note: Unusable batteries should be disposed of in accordance with relevant legislation. Only use ORIGINAL accessories to avoid damage to your phone. Emergency call may not be available under all cellular networks. Therefore, you should never depend solely on the phone for essential communications such as medical emergencies. Important Information This user's guide contains important information on the use and operation of this phone. Please read all the information carefully for optimal performance and to prevent any damage to or misuse of the phone. [. . . ] Scroll to highlight Time format by pressing [Select]. Select 12 hour or 24 hour you want by pressing [Select]. Phone settings [Menu 4-3] You can set the phone figures you want. Scroll to highlight Phone settings menu, and then press [Select]. Display settings Screen saver If you don't activate any function for 20 seconds, the picture will be displayed in a standby mode. Call You can set the animation as making a call. Wallpaper You can select background picture in a standby mode. Welcome note You can set the displayed message as turning on a phone. Greeting note If you select yes, this menu allows you select the standby display. Network name If you select On, you can set network name displayed on the phone as you want. ENGLISH 44 Accessing the Menu Backlight You can set the light-up duration you want whenever you press a key. LCD contrast You can set the brightness of LCD you want by pressing U , D . Serial port FAX You can set the rate of serial port to 19200bps for using the application between PC and fax. GPRS & Data You can set the rate of serial port to 115200bps for using PC application for GPRS call and Data call. Languages You can select the language you need displayed. ENGLISH 45 Settings [Menu 4] Accessing the Menu Call settings [Menu 4-4] You can set the menu relevant to a call by pressing [Select] in Setting menu. Anykey answer On If you select this menu, you can receive a call by pressing any key except E key. Off If you select this menu, you can receive an incoming call by only pressing S key. Note How to use Handfree portable: If you want to use the handsfree portable(earphone), please press the button # for a long time after inserting it to the connector when incoming a call. Send my number (network and subscription dependent) On If you select this, you can send your phone number to the other party. Press 4 key for direct access or use U and D to enter Settings. Scroll to highlight Security settings menu. Select Fixed dial number by pressing [Select]. If the PIN 2 code is correct, you can view the following submenus. Activate Cancel : You can restrict your outgoing calls to selected phone number. : You can call without restricting phone number. Number list : You can view the number list saved as Fixed dial number. ENGLISH 50 Accessing the Menu Change codes You can change the access codes : Security code, PIN, PIN2. Press 4 for direct access or use U and D to enter Settings. Scroll to highlight Security settings menu. Select Change codes by pressing [Select]. If you want to change the : Security code, PIN, PIN2, input your original code, and then press [OK]. Input new : Security code, PIN, PIN2, and verify them. Network settings [Menu 4-6] You can select the network which you will be registered either automatically or manually. [. . . ] You can swap between calls by selecting the [Options] key then Swap. 2-2 Setting up a Multiparty Call You can connect a call on hold to the currently active call to form a multiparty call by selecting the [Options] key then Multiparty/Join all. 2-3 Putting the Multiparty Call on Hold To put a multiparty call on hold, select the [Options] key then Multiparty/Hold all. ENGLISH 2-4 De-activate the Multiparty Call on Hold To de-activate a multiparty call on hold, select the [Options] key then Multiparty/Join all. 79 In call Menu Additional Functions 2-5 Adding Calls to the Multiparty Call To join an active call to the held multiparty call, select the [Options] key then Multiparty/Join all. 2-6 Displaying Callers in a Multiparty Call To scroll through the numbers of the callers who make up a multiparty call on the handset screen, press U and D keys. 2-7 Putting a Member of a Multiparty Call on Hold To place one selected caller (whose number is currently displayed on-screen) of a multiparty call on hold, select the [Options] key then Multiparty/Exclude. 2-8 A Private Call in a Multiparty Call To have a private call with one caller of a multiparty call, display the number of the caller you wish to talk to on the screen, then select the [Options] key and Multiparty/Private to put all the other callers on hold. 2-9 Ending a Multiparty Call The currently displayed caller of a multiparty call can be disconnected by pressing the [End] key. To end a multiparty call, press the [Options] key then select Multiparty/End multiparty. Selecting the [Options] key then Multiparty/End all, will end all the active and held calls. 2-10 Explicit Call Transfer (ECT) If you have one caller on hold and another active call, you may connect one call party to another call party and then leave the call. This is done by selecting the Multiparty/Transfer option from the in-call menu. ENGLISH 80 Accessories There are various accessories for your mobile phone. [. . . ]