User manual LG CT-29Q40VQ

[. . . ] Please read this manual carefully before operating your set and retain it for future reference. Y When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. Y When installing the wall mounting bracket, use the Protection Cover. Y This will protect the opening from accumulating dust and dirt. [. . . ] Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals. Y When watching 3D videos under fluorescent lights or with three wave length lamps, you may experience the screen blinking. When this occurs, turn the light off or turn it down. Y Other electronic or communication devices should be turned off or put away from the TV because it can cause interference and prevent the 3D function from working properly. Y When you watch TV lying down, 3D images may look darker or invisible. Y Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Y The available menus and options may differ from the input source or product model that you are using. Y New features may be added to this TV in the future. Y The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption. Antenna cable socket - The Antenna cable socket may differ from the model. Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. Y When transporting a large TV, there should be at least 2 people. Y Avoid touching the screen at all times, as this may result in damage to the screen. Y It is recommended to move the TV in the box or packing material that the TV originally came in. Y Before moving or lifting the TV, disconnect the power cord and all cables. Y When holding the TV, the screen should face away from you to avoid damage. Y When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. Make sure not to hold the transparent part, speaker, or speaker grill area. - Leave a 10 cm (minimum) space from the wall for proper ventilation. Securing the TV to a wall (This feature is not available for all models. [. . . ] If a USB device connected using a USB Hub is not detected, connect it to the USB port on the TV directly. This feature is not available in all countries. Y Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot. [. . . ]