User manual LG CW-XC63HU

[. . . ] The power source voltage of the AC adapter is listed on the nameplate. Plug the AC adapter only into an outlet with proper voltage. Industry Canada requirement This class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. FCC COMPLIANCE STATEMENT Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] In case a foreign object enters the drive, please consult the dealer where the drive was purchased. Don't interrupt the electric power while the drive is operating. While drive is operating, don't move the drive with disc, or don't give a shock to the drive, since it becomes the cause which damages disc. AC Adapter Don't plug in or remove the AC adapter using wet hands. Don't damage the AC adapter by scratching, modifying, or bending its prongs. Don't disassemble the AC adapter. The guarantee of operation of the connection via USB hub is not offered. When connecting with USB1. 1 interface, picture and sound may be disrupted while watching DVD Video. For smoother playback of DVDs, it is necessary to connect the drive to a high-speed USB 2. 0 connector. When connecting with USB1. 1 interface CD writing speed becomes about 4x and reading speed become about 6X max due to the limitation of the interface. 4 Location and function of controls This drive should be used only in its current hardware and software configuration. 1 9 (Bottom) POWER BUSY PUSH CLOSE 2 3 1. Power Busy Indicator ­ The indicator lights a steady green when the power to the drive is on, and the Indicator blinks when the disc is being set, or when the drive is accessing data. Eject Button ­ Press this button to open the top cover. The button works only when power is applied to the drive. Power Switch ­ Use this switch to turn the drive on and off. Stop the application software being currently used. Click the icon " " of the taskbar located on your screen's bottom right side. 3. Click "Safely Remove HL-DT-ST RW/DVD GCC-5241P-Drive[x:]". Click "Ok" and then remove the USB converter cable. NOTES Don't remove the USB converter cable when the Power busy indicator on the drive blinks, or during computer startup. 7 ON OFF Operation Loading and ejecting a disc Remember - AC adapter must be connected. POWE R BUSY PUSH CLOSE Loading a disc 1. Push the Eject Button to open the Top cover. (Label facing up. ) Push down on the center of the disc until the disc clicks into place. Otherwise the disc may spin off the spindle and be damaged. Also, be careful not to touch the lens on the pick-up mechanism. Notes When loading a disc, press the disc's inner edge against the side of the springloaded spindle bumper inside the disc compartment. Make sure that the disc is not sitting on top of the bumper before closing the top cover. ON OFF Ejecting a disc Power must be applied to the drive. Push the eject button to open the top cover. [. . . ] The disc doesn't match your system. Is the media disc the correct format for the type of system that you are using. Virus possibility. Corrective Action 1. (on a PC an ISO 9660 IBM compatible PC format as opposed to Apple/Mac HFS disc or UNIX disc formats will not function) 2. [. . . ]