User manual LG D8A0375EDF0

[. . . ] (1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production. A-2 … A-4 Front (ENG) 2 … … … … … 26 Front (ITA) 2 … … … … 29 blank Back Cover B-1 … … … B-15 (eng) OWNER’S MANUAL PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. Com A-2 TABLE OF CONTENTS TABLE OF CONTENTS A-3 SETTING UP THE TV A-3 Attaching the stand A-4 Tidying cables COMMON LANGUAGE LIST English Italiano LANGUAGE B-1 MAKING CONNECTIONS B-1 B-1 B-2 B-3 B-4 B-4 B-5 B-6 B-7 B-8 B-9 Antenna Connection Satellite dish Connection HDMI Connection DVI to HDMI Connection Component Connection Composite Connection MHL Connnection Audio Connection - Digital optical audio connection USB Connection CI module Connection Euro Scart Connection Stan B-11 SPECIFICATIONS COMMON SETTING UP THE TV A-3 SETTING UP THE TV Image shown may differ from your TV. 3 Attaching the stand 1 Only 50PH47**, 50/60PH67**, 50/60PH66** 3 EA M5 x 16 Only 42PH47** Only 50PH47**, 50/60PH67**, 50/60PH66** 3 EA M4 x 14 Stand Body Front 4 EA M5 x 16 Only 42PH47** 4 EA M4 x 14 Stand Base To detach the stand (Only 50PH47**, 50PH67**, 50PH66**) 1 2 4 EA M5 x 16 A-4 SETTING UP THE TV 2 Tidying cables Install the Power Cord Holder and Power Cord. [. . . ] 15) 14 ASSEMBLING AND PREPARING NOTE The yy items supplied with your product may vary depending on the model. Product specifications or contents of this manual may be changed without prior notice due to upgrade yy of product functions. How to use the ferrite core 1 Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug. [to a wall plug] [Figure 1] 2 Use the ferrite core to reduce the electromagnetic interference in the cable. Wind the component Y, Pb, Pr, L, R cable on the ferrite core once. [to an External device] [to the TV] 10 mm(+ / - 5 mm) ENGLISH [to the TV] (Black) [Cross Section of Ferrite Core] [Figure 2-1] Gather and bind the component Y, Pb, Pr, L, R and scart cable with the ferrite core. [to an External device] [to the TV] (Black) [Cross Section of Ferrite Core] [Figure 2-2] Wind the PC audio cable on the ferrite core once. [to an External device] 10 mm(+ / - 5 mm) [to the TV] [Figure 2-3] 10 mm(+ / - 5 mm) 3 Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN cable once on the ferrite core B and thrice on the ferrite core A. 18 ASSEMBLING AND PREPARING Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. Yy When transporting a large TV, there should be at least 2 people. Yy When transporting the TV by hand, hold the TV as shown in the following illustration. ENGLISH CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen. Yy It is recommended to move the TV in the box or packing material that the TV originally came in. Yy Before moving or lifting the TV, disconnect the power cord and all cables. Yy When holding the TV, the screen should face away from you to avoid damage. Yy When transporting the TV, do not expose the TV to jolts or excessive vibration. Yy When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. Yy Do not apply excessive pressure to cause flexing /bending of frame chassis as it may damage screen. Yy Hold the top and bottom of the TV frame firmly. [. . . ] This feature is not available in all countries. NOTE (*Not Provided) yy Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot. Yy If the TV does not display any video and audio when CI+ CAM is connected, please contact to the Terrestrial/Cable/Satellite Service Operator. [. . . ]