User manual LG DA-5620A

[. . . ] Adjusting the Air Flow Direction Vertically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6 6 7 7 x RECOMMENDATIONS FOR USE s s s s s Operating Recommendation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 11 x INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 The illustrations in the step-by-step procedures use four different symbols: PRESS PUSH IMPORTANT NOTE E-3 Air Conditioning Unit - Main Parts and Control Panel The design and shape are subject to change according to the model. Air outlet Air inlet (Inside) Air filter (The air filter is located in inside. ) Inner air flow blades (right/left orientation) Outer air flow blades (up/down orientation) Air inlet Ventilation lever Coolest Power plug (The type of power plug may differ, depending on the local power supply. ) Operating mode selection dial Temperature control dial Air flow blade swing switch E-4 Cooling Your Room You must select the Cool mode if you wish to lower the temperature in your room. You can also set the fan speed. 1 Select the operating mode and fan speed. Set the operating mode selection dial to. . . Turbo fan speed Between Turbo and Quiet Quiet fan speed Result: Turbo Cool Hi Cool Quiet Cool x The air conditioner starts up in Cool mode. x The fan starts up at the speed selected. 2 You can change modes at any time. To adjust the temperature, turn the temperature control dial to the desired position. Possible temperatures: Between 18°C and 29°C inclusive. Result: x The air conditioner starts cooling if the room temperature is higher than the selected temperature. 29°C ~ 27°C 27°C ~ 23°C 23°C ~ 18°C 3 To control the direction of the air flow, refer to page 7. E-5 Airing Your Room If the atmosphere in your room is stale, you can air it using the Fan feature and if necessary, evacuate the stale air outside. 1 If you wish to evacuate stale air outside, push the ventilation lever on the front of the unit to the right and the open position ( ). Result: The air inside the room circulates and stale air is evacuated outside. ). Coolest Coolest Otherwise, push the ventilation lever to the left and the closed position ( Result: The air simply circulates inside the room. 2 Set the operating mode selection dial to the Turbo Fan or Quiet Fan position. Turbo Fan : The fan turns rapidly. They may save you the time and expense of an unnecessary call. PROBLEM EXPLANATION / SOLUTION x Check that the circuit breaker used for the air conditioner The air conditioner does not operate at all has not been triggered. x Check that the power cable is plugged into a wall socket and the socket is switched on, if necessary. x Check that the correct operating mode has been selected (cooling or airing). The air conditioner does not cool x Check that the correct operating mode has been selected. x Dust may be blocking the air filter; refer to page 9 for cleaning instructions. x Check that there is no obstacle blocking the air flow into or out of the unit. The air flow direction does not change when you set the air flow blade swing switch to the position Odours are permeated in the room during air conditioning x Check that the air conditioner has been switched on; if necessary, turn the operating mode selection dial ; refer to page 7. x Air the room. E-10 Technical Specifications Design and specifications are subject to change without notice. Model AWT18S1WDB Power Supply 200-220V~, 50Hz E-11 Installation Before installation, be sure to check the installation area for the air conditioner, and drain hose. Checkpoints prior to installation 1 Check the cabinet and front grille of the unit for any harmful defects such as scratches. - Refer to the specifications on the label attached to the unit. Installation Conditions 1 As the unit is heavy, the wall or window of the installation area should have sufficient strength and durability for operation of the air conditioner, and for prevention of any vibration or noise. If it is weak, reinforcement work should be performed separately. 2 It is advisable to install the air conditioner in the north or west side to prevent the effect of direct sunlight. When installing it in the south or east side due to unavoidable circumstances, it is advisable to install the sunshade to prevent the direct sunlight. In this case, take care not to cause any hindrance to the flow of outside air. [. . . ] In this case, take care not to cause any hindrance to the flow of outside air. 3 When installing the air conditioner, be sure to obtain sufficient space on the rear side of the unit for smooth flow of air. When operating the air conditioner in closed areas such as inner building with cooling operation, and result in trouble with the unit. See the illustration below. Awning 85mm min. [. . . ]