User manual LG DCK-787

[. . . ] DVD PLAYER/ VIDEO CASSETTE RECORDER OWNER'S MANUAL MODEL : DCK787 BZ03 Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. Internet Address:http://ua. lge. com »ÌÙÓÏ^ËÓÌÌ ÒÎÛÊ· LG Electronics (380-44) 490-7777, 8-800-303-0000 Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. [. . . ] Please note there will be a slight loss in picture and sound quality when using LP. Make sure that you have correctly connected your DVD+VCR as described earlier in this book. Insert a video cassette with protection tab into your DVD+VCR. The video cassette should have the window side facing up and the arrow facing away from you. Press 3 or 4 to select the programme number you wish to record. You may also directly select programme number using the numbered buttons on the remote control. If you wish to record directly from the SCART or RCA jacks, repeatedly press AV until the socket you wish to record from is displayed. AV 1 for recording from EURO AV1 SCART jacks on the rear of your unit. AV 2 for recording from EURO AV2 DECODER jacks on the rear of your unit. AV 3 for recording from VIDEO IN and AUDIO IN (Left & Right) jacks on the front of your unit. Press LP if you wish to record in Long Play or Standard Play. SP will produce improved picture and sound quality, however LP will provide twice as much recording time as SP. Press REC/ITR on the remote to start recording. Press REC/ITR on the remote several times. Each successive press will increase the record time by 30 minutes until you reach a maximum of 9 hours. Press PAUSE/STEP to avoid recording unwanted scenes. Tapes can be paused for up to 5 minutes; RECP will be displayed when a tape is paused. After 5 minutes your DVD+VCR will stop recording to prevent damaging the tape or your DVD+VCR. Notes: If you do not wish to record on a tape (this can happen quite easily by accident!) remove the protection tab on the back edge of the video cassette. It is possible to record on a video cassette with the record protection tab removed by covering the hole with self adhesive tape. Remember you can record one programme while watching another by starting your instant recording, press TV/VCR to select TV mode and then selecting a different channel on your TV. 21 Operation Operation with tape Timer recording using On Screen Display You may set up to seven timer record events within one month of the current date. Note: Before setting the timer make sure that you have set the DVD+VCR clock correctly and you know which stations you have tuned TV stations on your DVD+VCR. [. . . ] Correction Insert a disc. The TV is not set to receive this unit's signal output. The video cable is not connected securely. The Progressive Scan is set to "On" on the setup menu but is connected to a standard (analog) television. Select the appropriate video input mode on the TV so the picture from the this unit appears on the TV screen. Connect the video cable into the jacks securely. [. . . ]