User manual LG DD345

[. . . ] DD345-P. BINDLLK_VCD 6/26/08 2:19 PM Page 1 DD345 DD345-P. BINDLLK_VCD 6/26/08 2:19 PM Page 2 Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. [. . . ] [Bitstream] ­ Select this when you connect this unit's DIGITAL AUDIO OUTPUT jack to an amplifier with a built-in Dolby Digital or MPEG decoder. [PCM] (for Dolby Digital / MPEG) ­ Select this when you connect this unit's DIGITAL AUDIO OUTPUT jack to an amplifier without a built-in Dolby Digital or MPEG decoder. [Off] (for DTS) ­ Select this when you connect this unit's DIGITAL AUDIO OUTPUT jack to an amplifier without a built-in DTS decoder. (Frequency) ­ Selects the sampling frequency of the audio signal. [48KHz]: The audio signals are always converted to 48 kHz. [96KHz]: The audio signals are output in their original format. Speaker Setup ­ Select an option according to the analog audio connection. [2 Ch]: Select when a 2 Channel stereo system is connected to this unit. [5. 1 Ch]: Select when a 5. 1 Channel surround system is connected to this unit. If [Speaker Setup] on the setup menu is set to [5. 1 Ch] during playback of the multi channel audio, only left channel and right channel will output audio. Adjust the display settings TV Aspect ­ Select which screen aspect to use based on the shape of your TV screen. [4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected. 7 DD345-P. BINDLLK_VCD 6/26/08 2:19 PM Page 8 Press vV to select an option then press b B to adjust the setting. [Speaker]: Select a speaker that you want to adjust. [Size]: Select a size of the selected speaker. (Large, Small, None) Any size cannot be selected depending on the selected speaker. [Volume]: Adjust the output level of the selected speaker. [Distance]: Select a distance to each speaker from the listening position. (0. 3m(1ft) - 6. 0m(20ft)) [Test]: Select [All], a test signal is sent to each speaker. During testing, you can select a speaker and adjust volume setting. DRC (Dynamic Range Control) ­ Make the sound clear when the volume is turned down (Dolby Digital only). Vocal ­ Set to [On] only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc mix into normal stereo sound. Press ENTER when [Select] icon is highlighted and you can view the registration code of the unit. [. . . ] To clear all music from the program list, select [Clear All] then press ENTER in program edit mode. The program is cleared when the disc is removed or the unit is turned off. Playing an CD-G disc Once you insert an CD-G disc, a menu appears on the screen. Use vV to select a track then press PLAY ( N). To display the CD-G menu during playx back, press STOP (x ) twice. [. . . ]