User manual LG DI-32Q82

[. . . ] Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. NOTES ON COPYRIGHTS: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. [. . . ] If you enter the wrong language code, press CLEAR. TV Aspect 4:3: Select when a standard 4:3 TV is connected. 16:9 Wide: Select when a 16:9 wide TV is connected. Display Mode Display Mode setting works only when the TV Aspect mode is set to "4:3". LetterBox: Displays a wide picture with bands on the upper and lower portions of the screen. Panscan: Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. 19 Initial Settings (continued) AUDIO Each DVD disc has a variety of audio output options. Set the player's AUDIO options according to the type of audio system you use. Sample Freq (Frequency) If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice is made, this unit automatically converts any 96 kHz signals to 48 kHz so your system can decode them. If your receiver or amplifier is capable of handling 96 kHz signals, select 96 kHz. When this choice is made, this unit passes each type of signal through without any further processing. Check the documentation for your amplifier to verify its capabilities. Enter a new password using the numbered buttons then press ENTER. To change the password: Press ENTER when the "Change" option is highlighted. Enter a current password using the numbered buttons then press ENTER. Enter a new password using the numbered buttons then press ENTER. If you forget your Security Code If you forget your security code you can clear it using the following steps: 1. Select the LOCK menu using b / B buttons. Input the 6-digit number "210499" and the security code is cleared. Area Code Enter the code of the area whose standards were used to rate the DVD video disc, based on the list in the reference chapter. Select "Area Code" on the LOCK menu then press B. Follow step 2 as shown previous page (Rating). Select the first character using v / V buttons. [. . . ] Please refer to the manuals of your TV, stereo system or other devices as necessary for additional connection information. Video and Audio Connections to Your TV Make sure the DVD player is connected directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the copy protection system. Video: Connect the VIDEO OUT jack on the DVD player to the video in jack on the TV using the video cable. Audio Connection to Your TV: Connect the AUDIO OUT jacks of the DVD Player to the audio left and right IN jacks on the TV using the audio cables. [. . . ]