Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual LG DOTR12CBIV. We hope that this LG DOTR12CBIV user guide will be useful to you.
Lastmanuals help download the user guide LG DOTR12CBIV.
Detailed instructions for use are in the User's Guide.
[. . . ] In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
Warning
To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not place anything containing liquid on top of the set, this may cause a fire or could give an electric shock.
Service
Never remove the back cover of the set as this can expose you to very high voltage and other hazards. If the set does not operate properly, unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket marked (option)on the back cover. For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto the screen. [. . . ] Press the G button and then D / E button to select On or Off on the XD pull-down menu. Repeatedly press the MENU button to return to normal TV viewing.
16
Picture adjustment
Eye (option)
Eye is an optional function. Only a set with eye option can perform this function. In some models, the set will automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the most suitable picture according to the surroundings. Press the EYE/
* button to switch the eye function on or off.
Off
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions. At this time the display in green does not appear continuously but the display in yellow appears each time the picture condition changes. Note : EYE function is not available for RGB input source.
VOL
PR OK PR
VOL
Picture adjustment
You can adjust picture contrast, brightness, colour intensity, sharpness and tint (NTSC input only) to the levels you prefer. Press the MENU button and then D / E button to select the Picture menu. Press the G button and then D / E button to select Contrast, Brightness, Colour or Sharpness. Press the G button and then F / G button to make appropriate
Picture PSM XD Contrast Contrast Brightness Colour Sharpness { { { { { { {
100
()O}{OOKOMENU
adjustments on the each sub menu. Press the G button to tune in a frequency on the X-wave menu. Use the number 0 to 9 or press the F / G button to match the TV's frequency and the FM receiver's.
Sound
Frequency.
PR
VOL
OK PR
VOL
SSM Turbo0Sound AVL Balance X-WAVE
{ { { { { SetOFreq { Off
X-WAVE 88MHz 107MHz
FM95. 0MHz
}{0-9OOKOMENU
()O}{OOKOMENU
Note: a. If the reception is poor or weak, select a different frequency. For best results, there should be no more than 5m (16. 4ft) between the TV and FM Receiver. In certain areas, the FM transmitter ability may be weak, such as near a broadcast tower. The reception sensitivity may depend on the kinds of receiver (FM radio).
19
Sound adjustment
Sound output selection
In AV mode, you can select output sound for the left and right loudspeakers. Repeatedly press the I/II/ button to select the sound output. L+R : Audio signal from audio L input is sent to left loud-speaker and audio signal from audio R input is sent to right loudspeaker. L+L : Audio signal from audio L input is sent to left and right loudspeakers. R+R : Audio signal from audio R input is sent to left and right loud-speakers.
*
Stereo/Dual reception
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast Mono Stereo Dual
On Screen Display
MONO STEREO DUAL I
Mono sound selection In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II/ button twice. In mono reception the depth of sound is improved. [. . . ] Press this button again to remove the display. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/GREEN, D / E or NUMBER buttons. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LG DOTR12CBIV
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual LG DOTR12CBIV will begin.