User manual LG DP281B

[. . . ] DP281B-P_AMARLLW_ENG Portable DVD Player Owner's Manual Model: DP281/DP281B Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING : Do not install this equipment in a confined space such a bookcase or similar unit. [. . . ] To access the Rating, Password and Area Code features, you must input the 4-digit password you created. If you have not yet entered a password you are prompted to do so. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. If you set a rating for the unit, all disc scenes with the same rating or lower are played. Higher rated scenes are not played unless an alternate scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc. Press ENTER to confirm your rating selection, then press SETUP to exit the menu. 21 Initial Settings (continued) Password You can enter or change password. Select Password on the LOCK menu then press B. To make a new password: Press ENTER when the "New" option is highlighted. Enter a new password using the numbered buttons then press ENTER. To change the password: Press ENTER when the "Change" option is highlighted. Enter a current password using the numbered buttons then press ENTER. Enter a new password using the numbered buttons then press ENTER. If you forget your password If you forget your password, you can clear it using the following steps: 1. Input the 6-digit number "210499" and the password is cleared. Area Code Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 41. Select "Area Code" on the LOCK menu then press B. Follow step 2 as shown previous page (Rating). Select the first character using v / V buttons. Press ENTER and select the second character using v / V buttons. [. . . ] Amplifier equipped with 2-channel digital stereo (PCM) or audio / video receiver equipped with a multi-channel decoder (Dolby DigitalTM, MPEG 2, or DTS): Connect one of the unit Coaxial jack to the corresponding in jack on your amplifier. Digital Multi-channel sound A digital multi-channel connection provides the best sound quality. For this you need a multi-channel audio / video receiver that supports one or more of the audio formats supported by your unit such as MPEG 2, Dolby Digital and DTS. Check the receiver manual and the logos on the front of the receiver. NOTES · If the audio format of the digital output does not match the capabil- Amplifier(Receiver) COAXIAL DIGITAL INPUT R L AUDIO INPUT and/or Coaxial cable (Not supplied) Audio/ Video cable (Supplied) ities of your receiver, the receiver produces a strong, distorted sound or no sound at all. [. . . ]