User manual LG DP382B-NB

[. . . ] http://www. lg. ca ENGLISH DP382B-NB / DP382-NR P/NO : MFL56732825 DP382B-N. ACANLLK_ENG(CA)_MFL56731 1 8/20/08 3:48:36 PM Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION · The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains etc. · No naked flame sources, such as lighted candles, should be placed on the apparatus. · Used batteries should be disposed of safely and not incinerated. Attention should be shown to the environment aspects of battery disposal. [. . . ] - Near a heating appliance. 7 DP382B-N. ACANLLK_ENG(CA)_MFL56737 7 8/20/08 3:48:39 PM Hooking up the unit Audio and Video Connection for AV IN or AV OUT Connect the AV IN/OUT jack on the unit to the corresponding input or output jacks on your TV or an external device using the supplied AV cable as shown below. Right side of the unit Revolving the LCD panel You can revolve the LCD panel of the unit clockwise a maximum of 180 degrees for use. You can also operate the unit after revolving the LCD panel 180 degrees and folding it back down. Plug into the "AV IN / OUT" jack. TV or the external device To revolve the LCD panel, place the unit on a stable and even surface such as on a table. Push the LCD panel up and then lift it into a vertical position. Revolve the LCD panel clockwise slowly 180 degrees. If you need, fold the LCD panel after revolving it. To revolve the LCD panel to its original position, open the LCD panel to a vertical position. Revolve the LCD panel counter clockwise slowly 180 degrees. · When finished using the unit, return the LCD panel to its original position. · Do not leave the LCD panel in the face-up position, or sudden shocks may damage it. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Selecting the operation mode You need to select a operation mode before using this unit. Press MODE on the unit and the operation mode selection menu appears. Use b / B to select a mode then press ENTER. · Select [DISC] to playback the inserted disc. · Select [AV IN] to watch a video/audio signals from the external device using this unit. · Select [USB] to playback the file(s) in the connected USB Flash Drive. 8 DP382B-N. ACANLLK_ENG(CA)_MFL56738 8 8/20/08 3:48:40 PM Adjust the settings BUTTON 1 2 3 4 5 6 Display setup menu: Select a desired option on the first level: Move to second level: Select a desired option on the second level: Move to third level: Change the setting: SETUP vV B vV B v V / ENTER Adjust the display settings TV Aspect ­ Select which screen aspect to use based on the shape of your TV screen. [4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected. Display Mode ­ If you selected 4:3, youll need to define how you would like widescreen programs and films to be displayed on your TV screen. [LetterBox]: This displays a widescreen picture with black bands at the top and bottom of the screen. [Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary. Adjust the audio settings DRC (Dynamic Range Control) ­ Make the sound clear when the volume is turned down (Dolby Digital only). [. . . ] Point the remote control at the remote sensor of the unit. Operate the remote control closer to the unit. General Power requirements Power consumption External Dimensions Net Weight (Approx. ) Operating temperature: Operating humidity Laser Signal system DC 9V 13. 5W 225 x 40 x 175 mm (W x H x D) 1. 06kg 5 °C to 40 °C 5 % to 90 % Semiconductor laser NTSC The power cord is disconnected. The battery is discharged. The power is on, but the unit does not work. The operation mode is not selected correctly. [. . . ]