User manual LG DP885

[. . . ] DP382-N_AUSALLR_MFL48000402 3/28/08 4:35 PM Page 1 ENGLISH DP885 For service/ support Call: Toll Free Number 1-800-243-0000 (http://us. lgservice. com) © Copyright 2008, LG Electronics U. S. A. , Inc. P/NO : MFL48000402 DP382-N_AUSALLR_MFL48000402 3/28/08 4:35 PM Page 2 Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. [. . . ] You can also operate the unit after revolving the LCD panel 180 degrees and folding it back down. A To revolve the LCD panel, place the unit on a stable and even surface such as on a table. Push the LCD panel up and then lift it into a vertical position. Revolve the LCD panel clockwise slowly 180 degrees. If you need, fold the LCD panel after revolving it. To revolve the LCD panel to its original position, open the LCD panel to a vertical position. Revolve the LCD panel counterclockwise slowly 180 degrees. · When finished using the unit, return the LCD panel to its original position. · Do not leave the LCD panel in the face-up position, or sudden shocks may damage it. W T fi la s TV or the external device Plug into the "AV IN/OUT" jack. A M p D M Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Selecting the operation mode You need to select a operation mode before using this unit. Press MODE on the unit and the operation mode selection menu appears. Use b / B to select a mode then press ENTER. · Select [DISC] to playback the inserted disc. · Select [AV IN] to watch a video/audio signals from the external device using this unit. · Select [USB] to playback the file(s) in the connected USB Flash Drive. 8 DP382-N_AUSALLR_MFL48000402 3/28/08 4:35 PM Page 9 Adjust the settings BUTTON 1 Display setup menu: 2 Select a desired option on the first level: 3 Move to second level: 4 Select a desired option on the second level: 5 Move to third level: 6 Change the setting: SETUP vV B vV B v V / ENTER Adjust the display settings TV Aspect ­ Select which screen aspect to use based on the shape of your TV screen. [4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected. Display Mode ­ If you selected 4:3, you'll need to define how you would like widescreen programs and films to be displayed on your TV screen. [LetterBox]: This displays a widescreen picture with black bands at the top and bottom of the screen. [Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary. Adjust the audio settings Adjust the settings - more you can do When you turn on for the first time The menu for a language selection will appear when you turn on the unit for the first time. You must select a language to use the unit. Use vV b B to select a language then press ENTER and the confirm menu will appear. Use b B to select [Enter] then press ENTER. DRC (Dynamic Range Control) ­ Make the sound clear when the volume is turned down (Dolby Digital only). [. . . ] Point the remote control at the remote sensor of the unit. Operate the remote control closer to the unit. Liquid Crystal Display Panel size Projection system Driving system Resolution 8. 5 inches wide (diagonal) R. G. B. stripe TFT active matrix 480 x 234 (WQVGA) The unit does not An unplayable disc is inserted. The remote control does not work properly. [. . . ]