User manual LG DRC6300N

[. . . ] Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an LG authorized service centre. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. [. . . ] How long finalization takes depends on the disc condition, recorded length and number of titles. [Finalize]: The [Finalize] menu appears. The unit starts finalizing after confirmation. [Unfinalize]: The finalized DVD-RW discs can be unfinalized after confirming on the [Unfinalize] menu. After unfinalizing, the disc can be edited and rerecord. Before finalizing, check the characteristics between the disc type in the table below. -RW +R +RW RAM -R The finalized DVD-RW discs can be unfinalized so that the disc can edit or record again. Once you finalize a disc, you can not edit or record anything on the disc. Discs are automatically finalized when removed from the unit. Finalization is not needed. 20 DRC6300N-W. BAUSLLK_ENG 6/16/08 10:38 AM Page 21 Disc Label ­ This function allows you to change the default disc name to something more descriptive. This name appears when you load a disc and when you display disc information on-screen. The time search box shows the elapsed playing time. Select the time search box and then input the required start time in hours, minutes, and seconds from left to right. For example, to find a scene at 2 hours, 10 minutes, and 20 seconds, enter "21020" and press ENTER. If you enter the wrong numbers, press b / B to move the under bar (_) to the wrong number. Then enter the correct numbers. d a Indicates channel number, station name, and audio signal (Stereo, Bilingual, Mono) received by the tuner. (The audio signal indication is available only for the analog channels. ) b Indicates media name and format. c Indicates the record mode, free space, and elapsed time progress bar. e Indicates program title, start time, end time, parental guidance level etc. (Digital Programs only) (Extended Text Message Icon): Indicates that there is an Extended Text Message available to provide detailed descriptions of the program (see page 24). (DTV Closed Caption Icon): Indicates that the current program contains the Closed Caption. (Wide Icon): Indicates that the current program is shown in wide picture format. [. . . ] b Set the resolution that your TV can accept. The channel is not found or stored. b Connect the audio connection securely. b The input source setting on the amplifier or the connection to the amplifier is incorrect. b The unit is in scan, slow motion, or pause mode. The remote control does not work properly. b b b b The remote control is not pointed at the remote sensor of the unit. The remote control is too far from the unit. [. . . ]