User manual LG DU-42PX12XC

[. . . ] Model Number : Serial Number : LG Electronics U. S. A. , Inc. Warning Warning WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. POWER CORD POLARIZATION: CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. NOTE TO CABLE/TV INSTALLER: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National Electric Code (U. S. A. ). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. REGULATORY INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] ·Highlight New Manual Recording and press ENTER to display the Record Options menu. ·Current information (i. e. , date, start and end times, channel, input) is displayed. · Recorder choice: Please choose the VCR only. This TV does not provide other devices with a recording feature. Owner's Manual 51 TV Guide On Screen System TV Guide On Screen ® System continued ·Use the left and right arrows to choose between Once, Daily, Weekly, and Off, as follows. W Once --records the time, channel, input, recorder combination one time. W Daily --records the time, channel, input, recorder combination Monday through Friday. W Weekly --records the time, channel, input, recorder combination once a week on this selected day of the week W Off (not cancel) --keeps the time, channel, input, recorder combination in the list without recording until the frequency is changed. When finished, press ENTER to highlight Schedule Recording. You see a Record icon for the selected frequency next to the show title. Note: Manual recording is listed by channel number. Highlight Cancel to close the menu, change no information, and return to the highlighted show. Before a recording begins, a notification screen appears if you are using a Cable box and your TV is On. At that time, you can choose to start or cancel recording. If the TV is not On, the recording occurs as scheduled. Use the D / E buttons to view the shows. Remind Conflict A conflict message appears for the following reasons: · a show set with an Auto-Tune Reminder has the same start time as an existing Auto-Tune Reminder. · If you are using a cable box, a show set with an AutoTune Reminder overlaps with a Recording already scheduled. Select one of these options: W auto-tune anyway - this show will override an existing show set to auto-tune W proceed, no auto-tune - set the show as a Reminder but do not auto-tune W don't set this reminder - cancel the Reminder Owner's Manual 55 Operation Operation Screen Setup for PC mode - Be sure to select the RGB-PC/RGB-DTV SET source before operation. (For RGB-DTV input source, Position and Reset are available. ) - In RGB-PC input source, settings are available. - In DVI-PC input source, Position, Size and Reset are available. - You can manually adjust picture position and minimize image shaking for the PC input source. Adjustment for screen Position, Size, and Phase 1. Press the ADJUST button and then use D or PHASE. Press ENTER button and then use adjustments. /E button to select POSITION, SIZE, buttons to make appropriate POSITION SIZE F D /E /F /G G D G E · The PHASE adjustment range is -16 ~ +16. · The SIZE adjustment range is -30 ~ +30. ·Note: In HDMI/DVI-PC mode, screen PHASE is not available. PHASE RESET Adjust Close Initializing (Reset to original factory values) - To initialize the adjusted values 1. Press the ADJUST button and then use D 2. [. . . ] TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. DISTRIBUTOR SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to state. [. . . ]