User manual LG DV1130

[. . . ] Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. [. . . ] 16:9 ­ Select when a 16:9 wide TV is connected. Display Mode Display Mode setting works only when the TV Aspect mode is set to "4:3". Letterbox ­ Displays a wide picture with bands on the upper and lower portions of the screen. Panscan ­ Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. 10 Progressive Scan Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. Caution: If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD Player. If you set Progressive Scan to On in error, you must reset the unit. Select "Off" using the v / V buttons. 2) Press STOP and hold it for five seconds before releasing it. The video output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV or monitor. TV Output Select Set the player's TV Output Select options according to the TV connection type. Press SETUP and setup menu apears on the TV screen. Use the numbered buttons to enter the 6-digit number "210499". See that "P-CLr" is displayed on the display window. Enter a new password as described above. Area Code Enter the code of the area whose standards were used to rate the DVD video disc, based on the list in the reference chapter. Select "Area Code" on the LOCK menu then press B. Select the first character using v / V buttons. Shift the cursor using B button and select the second character using v / V buttons then press ENTER, the password window will appear 4. Press ENTER, the password window will appear. If you have not entered password yet: When the "New Password" section is highlighted, enter a 4-digit password using the numbered buttons then press ENTER. Enter the 4-digit security password again to verify when the "Confirm Password" section is highlighted. If you have entered password already: Enter a 4-digit password you have entered using the numbered buttons. [. . . ] If you don't see an onscreen display after several minutes, some of the files may be too large -- reduce the resolution of the JPEG files to less than 2M pixels as 2760 x 2048 pixels and burn another disc. · The total number of files and folders on the disc should be less than 648. · Ensure that all the selected files have the ". jpg" extensions when copying into the CD layout. · If the files have ". jpe" or ". jpeg" extensions, please rename them as ". jpg" file. [. . . ]