User manual LG DV4700NC

[. . . ] Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] Auto: The whitebalance function is activated automatically. Manual: Adjust the white balance level on the Whitebalance level menu. · Whitebalance Level: Set the white balance level. This option is activated when you set to manual in the [Camera Whitebalance] setting menu. Press OK and adjust white balance using the left or right arrow button. Press OK to confirm the setting. · · Camera Exposure: Selects the Exposure Menu to match your lighting conditions. Auto: The system selects the Auto Exposure Menu to match your lighting conditions. If flickering occurs, try another setting. Camera WDR: WDR (Wide dynamic range) feature can be very helpful to cope with very challenging lighting conditions. It is capable of capturing both of the dark part and bright part and combining the differences into a scene to generate a highly realistic image as original scene. On: Select when you want to activate the WDR function. Off: Not used. 28 Installation Date Time 3 Installation · Time Server: Select time setting method. E. 164 Name: Enter the name of the device used when making calls with E. 164. This name is used when users register in the gatekeeper server. If the device is registered on gatekeeper server, the far site user can call this name. Security: H. 235 128-bit AES security in H. 323 calls. When enabled, the system automatically encrypts calls to other systems that have AES encryption enabled. When set to AES, calls connect, are encrypted only if the far end supports AES encryption. If the far end user does not support AES encryption, calls are not encrypted. Use Gatekeeper: Set to On when you use the gatekeeper function. This unit supports the H. 460 protocol for firewall and NAT traversal of H. 323 calls. You must have an H. 460 server configured in your environment for this feature to function properly. If you set to On, the H. 460 NAT, Gatekeeper Address and Gatekeeper Port options are enabled to set it. [. . . ] Make sure that you let out the video out correctly on your PC (e. g. Change the D-sub cable. Check that the D-sub cable is connected properly between the PC and the VCS system. · Check your VCS device's network accessibility. 1) Check the IP address, subnet, and gateway for typos when using a static IP. 2) Check that the IP address is correctly shown on the OSD using DHCP IP. [. . . ]