User manual LG DVD-3200P

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. [. . . ] Then enter the correct numbers. To repeat a sequence in a title: 1 Press PLAY MODE at your chosen starting point. Repeat icon and A- appears on the TV screen. 4 Within 7 seconds, press ENTER to confirm the start time. Playback starts from the selected time on the disc. 2 Press ENTER again at your chosen end point. Repeat icon and A-B appears on the TV screen, and the repeat sequence begins. 3 To stop the repeat A-B, press PLAY MODE repeatedly until "OFF" appears on the TV screen. Play modes DVD VR Video +RW +R Karaoke DVD While the disc is playing, press PLAY MODE repeatedly to select a play mode: DVD, DVD-RW(Video), DVD+RW, and DVD+R: REPEAT CHAPTER, REPEAT TITLE, REPEAT OFF Karaoke DVD: REPEAT CHAPTER, REPEAT| TITLE, RANDOM, NORMAL DVD-RW(VR): REPEAT CHAPTER, REPEAT TITLE, REPEAT ALL, REPEAT OFF ip By pressing SKIP > during Random playback, the unit selects another title (track) and resumes Random playback. 30 Operation with DVD (Continued) General Features (continued) Zoom DVD Video VR +RW +R 3 Press CLEAR. "Delete selected marker?Proceed?" message appears. 4 Use b / B to select "OK" then press ENTER. 5 Repeat steps 2-4 to erase additional Marked scene. The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM during playback or still playback to activate the Zoom function. Each press of the ZOOM button changes the TV screen in the sequence shown below. x1 size x2 size x4 size x1 size (normal size) Checking the Contents of DVD Video Discs: Menus DVDs may contain menus that allow you to access special features. To open the disc menu, press DISC MENU / LIST. Then, press the appropriate number button to select an option. Or, use the b B v V buttons to highlight your selection, then press ENTER. 2 Use the b B v V buttons to move through the zoomed picture. 3 To resume normal playback, press CLEAR or press ZOOM repeatedly until the normal picture appears. ote The zoom function may not work for some DVDs. Title Menu 1 Press TITLE. DVD Marker Search DVD Video VR +RW +R If the current title has a menu, the menu will appear on the TV screen. Otherwise, the disc menu may appear. 2 The menu may contain camera angles, spoken language and subtitle options, and chapters for the title. You can start playback from a memorized point. [Play] Start playback the selected title. [Open] Opens the folder and a list of files in the folder appears. About DivX movie files DivX disc compatibility with this recorder is limited as follows: Available resolution size of the DivX file is under 720x576 (W x H) pixel. The DivX subtitle file name has to be identified with the DivX file name to display by this unit. The total number of files and folders on the disc should be less than 1999. If the number of the screen frame is over 29. 97 frames per second, this unit may not operate normally. If the video and audio structure of recorded file is not interleaved, returns to the menu screen. If the file is recorded with GMC, the unit supports only 1-point of the record level. GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some MPEG4 encoders, like DivX, have this option. There are different levels of GMC encoding, usually called 1-point, 2-point, or 3-point GMC. [. . . ] The remaining blank space on the disc is insufficient. The source you are trying to record is copy protected. When setting the recording channel, the channel is tuned on the TV's own tuner. When recording to a Video mode disc, programs that are copy-once protected cannot be recorded. [. . . ]