User manual LG DVD3200EC

[. . . ] CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. [. . . ] 2 If the still picture vibrates vertically, stabilize it by using CH/TRK (v/V) on the remote control. Auto Tracking Automatic tracking adjusts the picture to remove snow or streaks and beings when: · · · A tape is played for the first time. Streaks or snow appear due to scratches on the tape. 3. Press PAUSE/STEP (X) repeatedly to advance the video picture one frame at a time. Note: After 5 minutes in STILL mode the DVD+VCR stops to protect the tape and video heads. 19 Operation Slow Motion 1. The tape is played at a speed 1/19 times slower than the normal speed. Use CH/TRK (v/V) on the Remote Control if necessary to adjust the tracking. To return to the normal speed, press PLAY (N). Notes: · During slow motion, audio is muted and horizontal lines (noise bars) may appear on the TV screen. This is normal. · After 3 minutes in SLOW MOTION mode the DVD+VCR goes back to PLAY mode to protect the tape and video heads. Set the AUDIO OUTPUT option to STEREO so that the left channel sound (L) is heard from the left speaker and the right channel sound (R) is heard from the right speaker. CM SKIP (Commercial Skip) This feature is useful for skipping commercials or short program segments. The DVD+VCR performs a fast forward picture search through 30 seconds of recording. If the tape x reaches the end before STOP (x) is pressed, the DVD+VCR stops, rewinds and ejects the tape. Tip: Use PAUSE/STEP (X) for best results when making changes while recording. For example, if you want to change channels while recording, first press PAUSE/STEP (X) to put the unit in pause mode, select the desired channel on the DVD+VCR, and then press PAUSE/STEP (X) again to resume recording. Note: During the VCR recording mode, you cannot change to the DVD mode. To record one TV program while watching another 1. Press TV/VCR to select the TV mode during recording. Using the TV, select the channel to be viewed. Timer Recording For unattended recording, you must input the channels to be recorded and the starting and ending times. Things to know before starting If you try to set the program timer before setting the clock, "PLEASE SET THE CLOCK" appears for a moment and then CLOCK menu appears on the TV screen. Set the time and date before proceeding. Be sure the TV is set to the DVD+VCR output channel (3 or 4). Make sure the TUNING BAND in the TUNING menu is set appropriately (TV or CATV). Use v / V to choose the PROGRAM menu and press ENTER/OK. If eight programs are already entered, the FULLY PROGRAMMED message appears for a moment and then PROGRAM 1 appears on the TV screen. Use the v / V buttons to switch between the program options, and the b / B buttons to input the program information: Input the month, day, start and stop times of the program you want to record. To pause the recording 1. [. . . ] Reprogram Timer and turn DVD+VCR off to enable timer. 35 Reference Specifications General Power requirements Power consumption Dimensions (approx. ) Weight (approx. ) Operating temperature Operating humidity Signal system 120V, 60 Hz 16 W 16. 9" X 3. 1" X 10. 4" (430 X 78. 5 X 265 mm) (w x h x d) 9. 24 lbs (4. 2 kg) 5°C to 40°C (41°F to 104°F) 5 % to 90 % NTSC Inputs ANTENNA IN VHS VIDEO IN(LINE1, 2) VHS AUDIO IN(LINE1, 2) Outputs VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT (PROGRESSIVE SCAN) Audio output (digital audio) Audio output (analog audio) RF OUT 1 V (p-p) 75 ohms, sync negative (Y) 1. 0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1 (C) 0. 286 V (p-p) 75 ohms (Y) 1. 0 V (p-p), 75 ohms, negative sync, RCA jack x 1 (Pb)/(Pr) 0. 7 V (p-p), 75 ohms, RCA jack x 2 0. 5 V (p-p), 75 ohms, RCA jack x 1 2. 0 Vrms (1 KHz, 0 dB), 600 ohms, RCA jack (L, R) x 1 Channel 3 or 4 (Adjustable) 75 ohms (VHF/UHF/CATV) 1 V (p-p) 75 ohms, sync negative, RCA jack x 2 -6. 0 dBm more than 47 ohms, RCA jack (L, R) x 2 VCR Specifications Head system Timer Tape speed Tape width Maximum recording time Rewind time Channel coverage Frequency range Signal-to-noise ratio Dynamic range Channel separation Four head helical scan azimuth system 12-hour display type with AM, PM SP: 33. 35 mm/sec, LP: 16. 67 mm/sec, SLP: 11. 12 mm/sec 12. 7 mm SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160) About 3 minutes (T-120) VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1) 20 Hz to 20 kHz More than 43 dB More than 88 dB More than 60 dB DVD Specifications Laser system Frequency response Semiconductor laser, wavelength 650 nm DVD (PCM 96 kHz): 8 Hz to 44 kHz, DVD (PCM 48 kHz): 8 Hz to 22 kHz CD: 8 Hz to 20 kHz More than 100 dB (ANALOG OUT jacks only) Less than 0. 008% More than 95 dB (DVD/CD) Signal-to-noise ratio Harmonic distortion Dynamic range Accessories: Video cable x 1, Audio cable (L/R) x 1, RF 75-ohm Coaxial Cable x 1, Remote control x 1, Batteries (R03/AAA) x 2 · Design and specifications are subject to change without prior notice. 36 37 ZENITH LIMITED WARRANTY-USA Zenith will repair or replace your product, at Zenith's option, if it proves to be defective in material or workmanship under normal use, during the warranty period ("Warranty Period") listed below, effective from the date ("Date of Installation") of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States, excluding U. S. WARRANTY PERIOD: LABOR: 90 DAYS from the Date of Purchase. PARTS: ONE YEAR from the Date of Purchase. [. . . ]