User manual LG DVR413

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. [. . . ] If you set Progressive Scan to [On] in error, you must reset the unit. Next, press and hold STOP for five seconds. The video output will be restored to the standard setting, and a picture will be visible on your TV. TV Output Select ­ Select an option according to the TV connection type. [RGB]: When your TV is connected with the SCART jack. [YPbPr]: When your TV is connected with the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks on the unit. Adjust the settings - more you can do When you turn on for the first time The menu for a language selection will appear when you turn on the unit for the first time. You must select a language to use the unit. Use vV b B to select a language then press ENTER and the confirm menu will appear. Use b B to select [Enter] then press ENTER. Adjust the audio settings Dolby Digital / DTS / MPEG ­ Selects the type of digital audio signal when using the DIGITAL AUDIO OUTPUT jack. [Bitstream]: Select this when you connect this unit's DIGITAL AUDIO OUTPUT jack to an amplifier with a built-in Dolby Digital, DTS or MPEG decoder. [PCM] (for Dolby Digital / MPEG): Select this when you connect this unit's DIGITAL AUDIO OUTPUT jack to an amplifier without a built-in Dolby Digital or MPEG decoder. X (Xx =Resume Stop, x =Complete Stop) The resume point may be cleared when a botton is pressed. (for example :POWER, OPEN/CLOSE, etc) Fast forward or fast reverse DVD DivX ACD WMA MP3 Press SCAN (m or M) to play fast forward or fast reverse during playback. You can change the various playback speed by pressing SCAN (m or M) repeatedly. Press PLAY ( N) to continue play at normal speed. Repeating a specific portion (A-B) DVD DivX ACD Press A-B at the beginning of the portion you wish to repeat and again at the end of the portion. Your selected portion will be repeated continually. To return to normal playback, press A-B to select [Off]. Playing a DVD that has a menu DVD Selecting a subtitle language During playback, press SUBTITLE ( language. DVD DivX Most DVD now have menus which load first before the film begins to play. You can navigate these menus using vV b B or number button to highlight an option. Press ENTER to select. ) repeatedly to select a desired subtitle DVD Playing a DVD VR disc This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. When you insert a disc DVD VR disc, the menu will appear on the screen. Use vV to select a title then press PLAY ( N). To display DVD-VR menu, press DVD MENU or TITLE. [. . . ] Move the cursor to select a ball you want to delete. And press Enter twice, the selected ball will be deleted. Only when more than two balls of the same color are connected, you can delete all of them. When all balls on screen are deleted, you can move to the next stage. [. . . ]