User manual LG DVT412

[. . . ] WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. [. . . ] [Off] (for DTS): Select this when you connect this unit's DIGITAL AUDIO OUTPUT jack to an amplifier without a built-in DTS decoder. (Frequency) ­ Selects the sampling frequency of the audio signal. [48 KHz]: The audio signals are always converted to 48 kHz. [96 KHz]: The audio signals are output in their original format. Adjust the language settings Menu Language ­ Select a language for the Setup menu and on-screen display. 9 DV499H-E. BHUNLLK_ENG 3/17/10 2:15 PM Page 10 DRC (Dynamic Range Control) ­ Make the sound clear when the volume is turned down (Dolby Digital only). Vocal ­ Set to [On] only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc mix into normal stereo sound. Adjust the DVB-T or DAB settings ON REMOTE 1 Select the DVB-T or DAB mode: When the first time to turn on the unit, the "First time installation" menu will appear. Select [YES] and press ENTER for auto channel scanning. (see " Auto Scan" below for details) Adjust the lock settings You must set the [Area Code] option to use the lock options. Enter a 4-digit password then press ENTER. Enter it again then press ENTER to verify. If you make a mistake while entering number, press CLEAR then correct it. [Country]: Use b B select a country where you operate this unit. [Auto Scan]: Use V b B to select [Yes] then press ENTER to start the channel scanning. TV Channel / Radio Channel ­ Displays the TV or Radio channel list. Use B to select the [Select] then press ENTER to display the channel list. You can also display the channel list pressing CH LIST while in DVB-T or DAB mode. While displaying channel list, press b B to display favorite channel list (See page 11). 10 DV499H-E. BHUNLLK_ENG 3/17/10 2:15 PM Page 11 Channel Class ­ This option allows you to set the favorite channel. Use v V select the a channel and press ENTER to set the favorite class on each channel (shows Fav icon on top of the screen). Aspect Ratio ­ Selects the aspects ratio of the connected TV. [4:3 PS]: Select this when connecting to a standard 4:3 screen TV and prefer the wide picture on the entire screen cuts off the portions that do not fit. [4:3 LB]: Select this when connecting to a standard 4:3 screen TV and prefer the wide picture with bands on the upper and lower portions of the screen. [16:9]: Select this when connecting to a wide-screen TV. Antenna Feed 5V ­ If you are using an indoor antenna, use one with a signal amplifier rated at DC 5V, 100mA and set this option to [ON]. [. . . ] If your TV is listed in the table below, set the appropriate manufacturer code. While holding down TV POWER button, and press the manufacturer code for your TV with the numerical buttons (see the table below). Release the TV POWER button to complete setting. Manufacturer LG / GoldStar O Zenith Samsung Sony Hitachi Code Number 1 (Default), 2 1, 3, 4 6, 7 8, 9 4 ON REMOTE 1 Select the disc mode: 2 Connect an USB Flash Drive to the USB port on the unit: 3 Display the menu screen in stop mode: 4 Select a file: To go directly to a file, enter the file number using the numbered buttons (0-9). MODE RETURN v V, DVD MENU 5 Play the file: 6 Remove the USB Flash Drive: N - PLAY Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. [. . . ]