User manual LG DVX392H

[. . . ] DV382H. 392H-E. BGBRLLK_2723_ENG 6/13/08 9:16 AM Page 1 ENGLISH DVX382H / DVX392H FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO BACK COVER OF THIS MANUAL. P/No. : MFL56732723 DV382H. 392H-E. BGBRLLK_2723_ENG 6/13/08 9:16 AM Page 2 Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. [. . . ] TV Output Select ­ Select an option according to the TV connection type. [RGB]: When your TV is connected with the SCART jack. [YPbPr]: When your TV is connected with the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks on the unit. Adjust the audio settings Dolby Digital / DTS / MPEG ­ Selects the type of digital audio signal when using the DIGITAL AUDIO OUTPUT jack. [Bitstream]: Select this when you connect this unit's DIGITAL AUDIO OUTPUT jack to an amplifier with a built-in Dolby Digital, DTS or MPEG decoder. [PCM] (for Dolby Digital / MPEG): Select this when you connect this unit's DIGITAL AUDIO OUTPUT jack to an amplifier without a built-in Dolby Digital or MPEG decoder. [Off] (for DTS): Select this when you connect this unit's DIGITAL AUDIO OUTPUT jack to an amplifier without a built-in DTS decoder. (Frequency) ­ Selects the sampling frequency of the audio signal. [48 KHz]: The audio signals are always converted to 48 kHz. [96 KHz]: The audio signals are output in their original format. DRC (Dynamic Range Control) ­ Make the sound clear when the volume is turned down (Dolby Digital only). Vocal ­ Set to [On] only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc mix into normal stereo sound. Adjust the settings - more you can do When you turn on for the first time The menu for a language selection will appear when you turn on the unit for the first time. You must select a language to use the unit. Use vV b B to select a language then press ENTER and the confirm menu will appear. Use b B to select [Enter] then press ENTER. Adjust the language settings Menu Language ­ Select a language for the Setup menu and on-screen display. Disc Audio/Subtitle/Menu ­ Select a language for the Disc Audio/Subtitle/ Menu. [Original]: Refers to the original language in which the disc was recorded. [Other]: To select another language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list. (see page 14) If you make a mistake while entering number, press CLEAR to delete numbers then correct it. [Off] (for Disc Subtitle): Turn off Subtitle. Adjust the display settings TV Aspect ­ Select which screen aspect to use based on the shape of your TV screen. [4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected. 8 DV382H. 392H-E. BGBRLLK_2723_ENG 6/13/08 9:16 AM Page 9 Adjust the lock settings You must set the [Area Code] option to use the lock options. [. . . ] The AUDIO options are set to the wrong position. Select the correct input mode of the audio amplifier. Component Video Output Set the AUDIO settings to the correct position. (Check the disc type and regional code. ) Change the rating level. Point the remote control at the remote sensor of the unit. Operate the remote control closer to the unit. [. . . ]