User manual LG DVX-692H

[. . . ] ENGLISH ESPAÑOL ITALIANO OWNER'S MANUAL DVD Player with Full HD up-scaling Please read this manual carefully before operating your set and retain it for future reference. DVX692H P/NO : MFL63266757 Getting Started 3 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. [. . . ] y The unit is able to provide a 1080p full HD image to most 1080p-capable TVs in the market today. However, there are some 1080p TVs available from certain companies that are limited in the types of 1080p images that can be accepted. Specifically, 1080p-capable TVs that don't accept images in 60Hz can't display an image from this unit. y For 720p, 1080p and 1080i resolution on the component / progressive scan output, only noncopy protected discs can be played back. If the disc is copy protected, it will be displayed at the 576p(480p) resolution. y Depending on your TV, some of the resolution settings may result in the picture disappearing or an abnormal picture appearing. In this case, press RESOLUTION repeatedly until the picture re-appears. 12 Connecting y If your TV is not capable of handling 96 kHz sampling frequency, set the [Sample Freq. ] option to [48 kHz] on the setup menu. y If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu. y Changing the resolution when the unit is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the unit and then turn it on again. y If the audio format of the digital output does not match the capabilities of your amplifier, the amplifier will produce a strong, distorted sound or no sound at all. Audio Cable Receiver / Amplifier Connecting to an Amplifier Connecting Audio cable 2 Connecting Connect the AUDIO OUTPUT on the unit to 2CH AUDIO IN on amplifier with Audio cable, such as AUDIO Left/Right with white/red. , Note Rear of the Unit y To see the audio format of the current disc in the on-screen display, press AUDIO. y This unit does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible amplifier via one of this unit's digital audio outputs. Connecting COAXIAL or OPTICAL (digital audio) cable Connect one of the unit's DIGITAL AUDIO OUTPUT (COAXIAL or OPTICAL) jacks to the corresponding jack on your amplifier. Connecting HDMI cable Connect the HDMI OUTPUT on the unit to the HDMI IN on amplifier with HDMI cable. (Type A, High Speed HDMITM Cable) Connect the HDMI OUT jack on amplifier to HDMI IN jack on TV with HDMI cable, if the amplifier has HDMI OUTPUT jack. Rear of the Unit Coaxial Cable OR optische kabel Receiver / Amplifier Rear of the Unit HDMI Cable TV COAXIAL OPTICAL HDMI Cable Receiver / Amplifier System Setting 13 Settings When the unit is turned-on at the first time, you have to select the desired language. [DISPLAY] Menu TV Aspect Select which screen aspect to use based on the shape of your TV screen. [4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected. Adjust the Setup Settings You can change the settings of the unit in the [Setup] menu. Use w/s to select the first setup option, and press d to move to the second level. Use w/s to select a second setup option, and press d to move to the third level. Use w/s to select a desired setting, and press ENTER (b) to confirm your selection. Display Mode If you selected 4:3, you'll need to define how you would like widescreen programs and films to be displayed on your TV screen. [Letterbox]: This displays a widescreen picture with black bands at the top and bottom of the screen. [Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary. 3 System Setting [LANGUAGE] Menu Menu Language Select a language for the Setup menu and onscreen display. Disc Audio/Subtitle/Menu Select a language for the Disc Audio/Subtitle/ Menu. [. . . ] Listen to music You can listen to music during during slide slide show, if the disc contain show music and photo files together. Use w/s/a/d to highlight (~) icon then press ENTER (b) to start slide show. 4 Operating 18 Troubleshooting Troubleshooting Symptom No power. The power is on, but the unit does not work. The unit does not start playback. Cause The power cord is disconnected. [. . . ]