User manual LG E2060S

[. . . ] ENGLISH OWNER'S MANUAL LED LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference. LED LCD MONITOR MODELS E1960S/E1960T E2060S/E2060T E2260S/E2260T/E2260V E2360S/E2360T/E2360V www. lg. com Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement. [. . . ] The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. MODE Button Use this button to enter F-ENGINE, ORIGINAL RATIO, PHOTO EFFECT menus. For more information, refer to page 26 to 31. 13 Control Panel Functions AUTO Button AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO button before entering the On Screen Display(OSD). (Only Analog Mode) This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is E1960T : 1360 x 768 E2060T : 1600 x 900 E2260T/E2360T : 1920 x 1080 E2260V/E2360V : 1920 x 1080 INPUT Button (SOURCE Hot key) When two input signals at least are connected, you can select the input signal (D-SUB/DVI/HDMI) you want. When only one signal is connected, it is automatically detected. The default setting is D-Sub. EXIT Button Exit the OSD(On Screen Display). Power Button & Use this button to turn the display on or off. Power Indicator The power indicator stays light blue if the display is running properly (On Mode). If the display is in Sleep Mode (Energy Saving), the power indicator is red. 14 On Screen Display (OSD) Control Adjustment Screen Adjustment E1960S/E2060S/E2260S/E2360S Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. To make adjustments in the On Screen Display, follow these steps: 1 2 3 4 Press the discretionary button, then the main menu of the OSD appears. To access a control, use the corresponding buttons. Use the Use the / buttons to adjust the image to the desired level. button to select other sub-menu items. Press the EXIT Button to exit from the OSD. 15 On Screen Display (OSD) Control Adjustment Screen Adjustment E1960T/E2060T/E2260T/E2360T Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. To make adjustments in the On Screen Display, follow these steps: 1 2 3 4 Press the discretionary button, then the main menu of the OSD appears. To access a control, use the corresponding buttons. Use the Use the / buttons to adjust the image to the desired level. button to select other sub-menu items. Press the EXIT Button to exit from the OSD. 16 On Screen Display (OSD) Control Adjustment Screen Adjustment E2260V/E2360V Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. To make adjustments in the On Screen Display, follow these steps: 1 2 3 4 Press the discretionary button, then the main menu of the OSD appears. [. . . ] packing) Range Power Input AC-DC Adapter Tilt : -5° to 15° 12 V 2. 0 A Type ADS-24NP-12-1 12024G, manufactured by HONOR Electronic Environment al Conditions Operating Conditions Temperature 10 °C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 °C to 60 °C Humidity 5 % to 90 % non-Condensing Stand Base Power cord Attached ( ), Detached ( O ) Wall-outlet type NOTE Information in this document is subject to change without notice. 38 Specifications Display 54. 6 cm (21. 5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 54. 6 cm 0. 248 mm x 0. 248 mm (Pixel pitch) Horizontal Freq. Input Form 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. E2260S Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions & Weight Signal Input Input Form Max Recommend DDC 2AB On Mode Sleep Mode Off Mode 15 pin D-Sub Connector RGB Analog (0. 7 Vp-p/ 75 ohm) VESA 1920 x 1080 @60 Hz VESA 1920 x 1080 @60 Hz : 26 W(Typ. ) 1W 0. 5 W Without Stand Width 50. 88 cm (20. 03 inch) Height 38. 74 cm (15. 25 inch) Depth 3. 10 cm (1. 22 inch) 2. 3 kg (5. 07 lb) With Stand Width 50. 88 cm (20. 03 inch) Height 39. 24 cm (15. 45 inch) Depth 17. 20 cm (6. 77 inch) Weight(excl. packing) Range Power Input AC-DC Adapter Tilt : -5° to 15° 12 V 3. 0 A Type FSP036-DGAA1, manufactured by FSP Electronic or type LCAP07F, manufactured by Lienchange Electronics Environment al Conditions Operating Conditions Temperature 10 °C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 °C to 60 °C Humidity 5 % to 90 % non-Condensing Attached ( ), Detached ( O ) Stand Base Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 39 Specifications Display 54. 6 cm (21. 5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 54. 6 cm 0. 248 mm x 0. 248 mm (Pixel pitch) Horizontal Freq. Input Form 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. [. . . ]