User manual LG EOU3000

[. . . ] MFL67441711 Total pages : 260 pages A-2 A-3 … A-7 Blank Front Cover (EN) 2 3 … 25 26 27 Blank Front Cover (GE) 2 3 … 25 26 Front Cover (FR) 2 3 … 25 26 Front Cover (IT) 2 3 … 25 26 27 28 29 30 31 32 Front Cover (SP) 2 3 … 25 26 Front Cover (PO) 2 3 … 25 26 F t Front Cover (DU) 2 3 … 25 26 Front Cover (GR) 2 3 … 25 26 Back Cover B-1 … B-35 OWNER’S MANUAL LED LCD TV Please read this manual carefully before operating your set and retain it for future reference. νικά LANGUAGE B-1 MAKING CONNECTIONS B-1 B-2 B-3 B-5 B-6 B-8 B-10 B-11 B-13 B-14 B-18 B-19 B-21 B-22 B-24 Antenna connection Satellite connection HDMI connection - ARC (Audio Return Channel) DVI to HDMI connection MHL connection RGB-PC connection Component connection Composite connection Euro scart connection Audio connection - Digital optical audio connection USB connection CI module connection Headphone connection B-31 SPECIFICATIONS COMMON SETTING UP THE TV A-3 SETTING UP THE TV Image shown may differ from your TV. Attaching the stand 47/55LM96** 1 Stand body 4 EA M4 x 20 4 4 EA M4 x 20 Front Stand base Top View 2 Stand rear cover 3 CAUTION yy Make sure that the screws are inserted correctly and fastened securely. If they are not fastened securely enough, the TV may tilt forward after being installed. [. . . ] B-14) Cinema 3D glasses The number of 3D glasses may differ depending on the model or country. Dual play glasses (Depending on model) Polishing cloth (Depending on model) Use this to remove dust from the cabinet. A-7) Power cord Wireless LAN ASSEMBLING AND PREPARING 15 CAUTION If there is a Isolator, follow as shown. Yy » Use this to install TV in a place where there is a voltage difference between TV set and GND of antenna signal. If there is a voltage difference between TV set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident. » You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation. » Before starting, be sure that the TV antenna is connected. Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box. Securing the TV to a wall This feature is not available for all models. ENGLISH ENG 10 cm m 10 c 10 cm 10 cm 2 Connect the power cord to a wall outlet. CAUTION yy Do not place the TV near or on sources of heat, as this may result in fire or other damage. Adjusting the angle of the TV to suit view Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20˚ 20˚ 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. - If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface. CAUTION yy Make sure that children do not climb on or hang on the TV. [. . . ] OPMERKING IN yy Image shown may differ from your TV. Max feature ANTENNA LNB IN DIGITAL Satellite / CABLE NOTE AUDIO Check if the CI module is inserted into the yy PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot. Du casque : 9 mW à 15 mW yy Taille de la prise casque : 0, 35 cm IN COMPONENT PR PB Y AUDIO UDIO B/DVI) IN/OUT AV1 (RGB) IN ANTENNA OPTICAL H/P DIGITAL Satellite / CABLE AUDIO 13/18V 700mA Max LNB IN OUT English Transmits the headphone signal from the TV to an external device. [. . . ]