User manual LG EVCM421

[. . . ] Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. [. . . ] 2 Follow the step 2 as shown above (Rating). To change the password, press SELECT/ENTER when the "Change" option is highlighted. Input a password and press SELECT/ENTER. Enter it again and press SELECT/ENTER to verify. If you forget your password If you forget your password, you can clear it using the following steps: 1 Press SETUP to display the Setup menu. 2 Input the 6-digit number "210499" and press SELECT/ENTER. Use / to select the desired speaker. Speaker selection Select a speaker that you want to adjust. [Front speaker (Front L), Front speaker (Front R), Center Speaker (Center), Subwoofer (SubWoofer), Rear speaker (Rear L), Rear speaker (Rear R)] Note: Certain speaker settings are prohibited by the Dolby Digital licensing agreement. Size Since the speaker settings are fixed, you cannot change the settings. Volume Press / to adjust the output level of the selected speaker. (-5dB ~ 5dB) Distance If you connected speakers to your DVD/CD unit setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point. Press SELECT/ENTER to exit. Note All the downloaded videos from DivX® VOD can only be played back on this unit. 16 Operation with DVD and Video CD General features Buttons Z (OPEN / CLOSE) X (PAUSE) SKIP (. / >) Operations Opens or closes the disc tray. During playback, press X to pause playback. Press X repeatedly to play Frame-by-Frame. or >) to go to the next chapter/track or to return to the beginning of the current chapter/track. twice briefly to step back to the previous chapter/track. Discs ALL DVD ALL VCD DivX SCAN (m / M) During playback, press SCAN (m or M) repeatedly to select the required scan speed. DVD : 5 steps (BB, BBB, BBBB, BBBBB, BBBBBB) (FF, FFF, FFFF, FFFFF, FFFFFF) DivX disc, Video CD :4 steps (BB, BBB, BBBB, BBBBB) (FF, FFF, FFFF, FFFFF) WMA/MP3, Audio CD m(X2, X4, X8) or BB (X2, X4, X8) During playback, press REPEAT repeatedly to select a desired repeat mode. DVD Video discs: Chapter/Title/Off Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off During playback, press REPEAT A-B to select a point A and a point B, and the device repeats a sequence from point A (Starting point) to point B (End point). During playback or in the pause mode, press ZOOM to the video image (3 steps). You can move through the zoomed picture using / / / buttons. If the current DVD title has a menu, the title menu appears on the screen. [. . . ] · No stations have been preset or preset stations have been cleared (when tuning by scanning preset stations). The remote control does not work properly. · The remote control is not pointed at the remote sensor of the unit. · The remote control is too far from the unit. [. . . ]