User manual LG EWF 8702

[. . . ] Hazards or unsafe practices that may result in minor personal injury or property damage. To reduce the risk of fire, explosion, electric shock, or personal injury when using your washer, follow these basic safety precautions: CAUTION CAUTION BEFORE USING THE APPLIANCE CAUTION Packing materials can be dangerous to children; keep all packing material (plastic bags, polystyrene, etc. ) well out of the reach of children. The appliance is designed for home use only. Make sure that water and electrical connections are made by qualified technicians, observing the manufacturer's instructions (see "Installing the Washing Machine") and local safety regulations. [. . . ] During execution of the program, the program indicator blinks. Press the button repeatedly to select one of the six available wash program. Cotton Baby Cotton Synthetics Handwash Wool Quick Wash Rinse+Spin Spin Press the button repeatedly to cycle through the available water temperature options (cold water, 30°C, 40°C , 60°C and 95°C). When pressing this button during washing, you can see the selected temperature in the display panel. Press the button repeatedly to cycle through the available spin speed options. WF7704NA, WF7604NA no spin ( no spin ( no spin ( no spin ( ), 400, 800, 1400 rpm ), 400, 800, 1200 rpm ), 400, 800, 1000 rpm ), 400, 800, 800+ rpm Display panel Program Select button Temp selection button 2 3 4 Spin selection button WF7702NA, WF7602NA, WF7522NA WF7700NA, WF7600NA, WF7520NA WF7708NA, WF7608NA, WF7528NA Press the button repeatedly to cycle through the available partial wash options. Easy Iron Rinse Hold Rinse+ Prewash Easy Iron + Rinse Hold Easy Iron + Rinse+ Easy Iron + Prewash Rinse+ + Prewash Easy Iron + Rinse+ + Prewash Prewash is only available when washing cotton, Baby Cotton or synthetics. According to selected course, there are unselected functions. 6 7 5 Function button Delay End selection button Start/Pause button (On/Off) button Press this button repeatedly to rotate between the retarded start options available. (from 3 Hours to 24 Hours, in 1 hour increments) Press to pause and restart programs. Press once to turn the washing machine on, press again to turn the washing machine off. If the washing machine power is left on for longer than 10 minutes without any buttons being touched, the power automatically turns off. 8 8_ Washing a load of laundry What is the "Child Lock" function?· · · If you press the "Child Lock" button(Spin+Function button) longer than 2 sec during operation, this function is selected. Press the Temp button to select the temperature (cold water , 30°C, 40°C, 60°C, 95°C). Press the Start/Pause button and the machine will begin the cycle. The door will not open until 3 minutes after the machine stops or the power turns off. The slow rotation of the drum is not a sign of failure after the last spin of Cotton, Baby Cotton, or Quick Wash cycles. When determining the detergent quantity, it's necessary to consider recommendations of the detergent manufacturer, indicated on the package, as well as weight, type of laundry, it's fouling factor and water hardness in your region. Keep detergents and additives in a safe, dry place out of the reach of children. Washing a load of laundry _11 maintaining the washing machine REPAIRING A FROZEN WASHING MACHINE If the temperature drops below freezing and your washing machine is frozen: 1. Pour warm water on the source faucet to loosen the water supply hose. Remove the water supply hose and soak it in warm water. Pour warm water into the washing machine drum and let it sit for 10 minutes. Reconnect the water supply hose to the water faucet and check if the water supply and drain operations are normal. CLEANING THE EXTERIOR 1. Wipe the washing machine surfaces, including the control panel, with a soft cloth and nonabrasive household detergents. [. . . ] Check the end of the drain hose is too low. (Make sure the holder of drain hose in the back is intact) Check the end of the drain hose is submerged in water. 04 Troubleshooting 5E UE · LE · Before contacting After-Sales service: 1. Try to remedy the problem (See "Troubleshooting" on this page). [. . . ]