User manual LG EXV1511B

[. . . ] Contact your dealer if the display is not operating properly. To Avoid Personal Injury : Do not place the display on a sloping shelf unless properly secured. Use only a stand recommended by the manufacturer. To Prevent Fire or Hazards: Always turn the display OFF if you leave the room for more than a short period of time. [. . . ] Disposal of this product must be carried out in accordance to the regulations of your local authority. A2 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand base 1. Place the monitor with its front facing downward on a cushion or soft cloth. Align the hooks on the stand base with the matching slots in the base of the monitor. 3. Insert the hooks into slots. Hook Removing the stand base 1. Place the monitor with its front facing downward on a cushion or soft cloth. To remove the stand base, hold the bottom of the stand with one hand and pull the base bottom latch with the other hand, as shown in the figure. Bottom Latch Important This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Once you connect the stand base, try not to disconnect it. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. A3 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for servaral seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for servaral seconds. The message "OSD UNLOCKED" should appear. MUTE Button Used to select mute on (means sound off) and mute off (means sound on). A8 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments. To make adjustments in the On Screen Display, follow these steps: MENU AUTO/SET MENU MENU Press the MENU Button, then the main menu of the OSD appears. To access a control, use the or Buttons. When the icon you want becomes highlighted, press the AUTO/ SET Button. Use the Buttons to adjust the item to the desired level. Accept the changes by pressing the MENU Button. Exit the OSD by pressing the MENU Button. A9 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. Main menu PICTURE Sub-menu BRIGHTNESS CONTRAST GAMMA COLOR PRESET RED GREEN BLUE POSITION TRACKING HORIZONTAL VERTICAL CLOCK PHASE SETUP LANGUAGE OSD HORIZONTAL Reference To adjust the brightness, contrast and gamma of the screen To customize the color of the screen 6500K 9300K To adjust the position of the screen To improve the clarity and stability of the screen To customize the screen status for a user's operating environment POSITION VERTICAL WHITE BALANCE POWER INDICATOR FACTORY RESET : Adjustable NOTE The order of icons may differ depending on the model (A10~A13). A10 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. [. . . ] Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www. lge. com. Make sure to check if the video card supports Plug&Play function. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? Audio function No sound. Check if the audio cable is correctly connected. [. . . ]