User manual LG F1256LD

[. . . ] Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting Dry Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The air conditioner runs in the Energy saving function. The outer airflow blade moves up and down. The airflow direction indicator is displayed automatically. To stop the Energy saving function, press the Note You can select the Energy saving function only in Cool mode. 3 button to adjust the temperature until the required Press the temperature is displayed. You can set the temperature between 26°C and 30°C. Note If you want to adjust temperature under 26°C, cancel the Energy saving function before adjusting the temperature. 4 Press the to select the fan speed until the required setting is displayed. Auto Low Medium High Turbo Result: Each time you press the button, the indoor unit beeps. 5 To control the airflow direction, refer to page 20. E-17 Selecting Good Morning Mode Good Morning mode helps users to fall asleep well after going to bed whether being too hot to sleep or being awakened by coldness. The Good Morning mode can be selected only when the air conditioner is switched on or off in cool mode. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in Cool mode with Turbo fan speed. The indoor unit beeps. 2 Press the Result: button to select cool mode. On set to the default position. Adjusting the Airflow Direction Horizontally You can adjust airflow direction horizontally manually. The inner blades with small fins move the air in the desired direction. 1 Adjust the inner blades by moving them left or right. Make sure do not touch the inner blades during operation. It may cause injury on your fingers. E-20 Selecting the Auto Cleaning Function You can select the Auto Cleaning Function if you want to sterilize the air conditioner or remove mold. You can set this function even when the air conditioner is turned off. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in Cool mode with Turbo fan speed. The indoor unit beeps. 2 Press the Result: button. The indicator on the indoor unit lights up and the Auto Cleaning function is set. When you turn the air conditioner off, it operates the Auto Cleaning function for 30 minutes. After 30 minutes, the air conditioner turns off. [. . . ] When the power returns, the air conditioner will start up again automatically. When the air conditioner is started immediately after being plugged in or stopped, the normal operation starts up after 3 minutes for the reason of protection. Protection mechanism E-26 Solving Common Problems Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call. Problem The air conditioner does not operate at all. [. . . ]