User manual LG F1443KD

[. . . ] Please read this manual carefully before operating your washing machine and retain it for future reference. Please read your owner's manual carefully, it provides instruction on safe installation, use and maintenance. Record the model and serial number of your washing machine. How to use washer More economical with Intelligent Wash system Intelligent Wash System detects the size of load and water temperature, and then determines the optimum water level and washing time to minimize energy and water consumption. [. . . ] â· When in Pause, the power is turned off automatically after 4 minutes. You can set a time delay so that the washing machine will start automatically and finish after a specified time interval. the delay time is the time to the end of the programme , not the start. The actual running time may vary due to water temperature, wash load and other factors. Favorite program allows you to store a customized wash cycle for future use. (Washing method, number of rinses, spin speed, water temperature etc. The Favorite program is now stored for future use. Rinse+Spin : This can be helpful in preventing fresh stains from setting in fabrics. Time Save : This option can be used to reduce the time of a wash program. Rinse++Hold : Add rinse once then after rinsing process, the course is paused until start button is pressed again. â· Normal+Hold : The course is paused until start button is pressed again when rinse is finished. When you select "No Spin", it will still rotate for a short time with low speed to drain quickly. Water temperature can be selected according to the program. Select this function to lock the buttons on the control assembly to prevent tampering. "Child Lock" can be set only during the washing cycle. When the child lock is set, all buttons are locked except for the Power button. Turning off the power will not reset the child lock function. You must deactivate child lock before you can access any other functions. The Beep on/off function can be set only during the washing cycle. Once the Beep on/off function is set, the setting is memorized even after the power is turned off. If you want to turn the Beeper off, simply repeat this process. Tub Clean is a special cycle to clean the inside of the washing machine. [. . . ] " button for three seconds, while holding the phone mouthpiece to the icon or Power button. Keep the phone in place until the tone transmission has finished. This takes about 17 seconds, and the display will count down the time. â· For best results, do not move the phone while the tones are being transmitted. [. . . ]