User manual LG F14A8YD5

[. . . ] OWNER’S MANUAL WASHING MACHINE Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the washer is installed correctly and safely. Leave these instructions near the washer after installation for future reference. 3 Important safety instructions Important safety instructions . [. . . ] • To cancel the Time Delay function, the power button should be pressed. Additional program • Use these buttons to select the desired cycle options for the selected cycle. Program dial • Programs are available according to the laundry type. €¢ Lamp will light up to indicate selected program. LED display • The display shows the settings, estimated time remaining, options, and status messages for your washer. The display will remain on through the cycle. Start/Pause • This Start/Pause button is used to start wash cycle or pause the wash cycle. • If temporary stop of wash cycle is needed, press the Start/Pause button. • When in Pause, the power is turned off automatically after 4 minutes. Options • This allows you to select an additional cycle and will light when selected. 22 How to use washer ■ Additional program Time Delay You can set a time delay so that the washing machine will start automatically and finish after a specified time interval. Favorite Favorite program allows you to store a customized wash cycle for future use. (Washing method, number of rinses, spin speed, water temperature etc. Touch and hold Favorite program button for 3 seconds. The Favorite program is now stored for future use. To reuse the program, select Favorite program and press the Start/Pause. NOTE • The delay time is the time to the end of the programme, not the start. The actual running time may vary due to water temperature, wash load and other factors. Touch the Time Delay button and set time required. This allows the final rinse to be heated to 40 degrees. Press the Medic Rinse button and set time required. 23 How to use washer ■ Options ■ Other functions Wash • Time Save : This option can be used to reduce the time of a wash program. [. . . ] • If the call center agent is not able to get an accurate recording of the data, you may be asked to try again. • Pressing the Power button during the transmission will shut off the SMARTDIAGNOSIS™. Once the countdown is over and the tones have stopped, resume your conversation with the call center agent, who will then be able to assist you using the information transmitted for analysis at the call to Customer information center. 38 Terms of Warranty Disposal of your old appliance 1. [. . . ]