User manual LG FC950SW

[. . . ] Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. [. . . ] Select "DivX(R) Registration" option and then press B. Press ENTER while "Select" is selected and the registration code will appear. Use the registration code to purchase or rent the videos from DivX® VOD service at www. divx. com/vod. Follow the instructions and download the video onto a disc for playback on this unit. Note: All the downloaded videos from DivX® VOD can only be played back on this unit. 13 Installation and Setup Operation General features Buttons Z (OPEN / CLOSE) X (PAUSE) SKIP (. / >) Operations Opens or closes the disc tray. During playback, press X to pause playback. Press X repeatedly to play Frame-by-Frame. or >) to go to the next chapter/track or to return to the beginning of the current chapter/track. twice briefly to step back to the previous chapter/track. Discs ALL ALL DVD ALL VCD DivX SCAN (m / M) During playback, press SCAN (m or M) repeatedly to select the required scan speed. DVD : bb, bbb, bbbb, bbbbb, bbbbbb or BB, BBB, BBBB, BBBBB, BBBBBB DivX disc, Video CD : bb, bbb, bbbb, bbbbb or BB, BBB, BBBB, BBBBB WMA/MP3, Audio CD : m(X2, X4, X8) or M(X2, X4, X8) During playback, press REPEAT repeatedly to select a desired repeat mode. When the selected system is not compatible with the system of your TV, normal colour picture may not be displayed. NTSC: Select when DVD/CD Receiver is connected with NTSC-TV. PAL: Select when DVD/CD Receiver is connected with PAL-TV. To enter a Marker You can start playback from up to nine memorized points. To enter a marker, press MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly. The marker search menu appears on the screen. Within 10 seconds, press b / B to select a marker number that you want to recall or clear. Press ENTER and playback starts from the marked scene. Or press CLEAR and the marker number is erased from the list. You can play any marker by inputting its number on the marker search menu. Screen Saver The screen saver appears when you leave the unit in Stop mode for about five minutes. AUTO: Select when DVD/CD Receiver is connected with Multi system TV. 15 Operation Playing an Audio CD or MP3/WMA file This unit can play Audio CDs or MP3/WMA files. [. . . ] · Cancel the Rating function or change the rating level. · Connect the speakers and components securely. · Move your TV away from the audio components. · The TV is not set to receive DVD signal output. · The video cable is not connected securely. · The connected TV power is turned off. [. . . ]