User manual LG FE-215E

[. . . ] Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting Heat Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Note If you want to adjust temperature under 26°C, cancel the Energy saving function before adjusting the temperature. 4 Press the to select the fan speed until the required setting is displayed. Auto Low Medium High Result: Each time you press the button, the indoor unit beeps. 5 To control the airflow direction, refer to page 20. Selecting Mode mode helps users to fall asleep well after going to bed whether being too hot to sleep or being awakened by coldness. The mode can be selected only when the air conditioner is switched on or off in cool/heat mode. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the Result: button to select cool or heat mode. The indoor unit beeps each time you press the The air conditioner runs in cool or heat mode. button. 3 Press the Result: button. The Off timer is blinking on the remote control. 4 To set the Off timer, press the until the required Off time is displayed. Result: buttons once or more times The mode will be automatically stopped in 8 hours if the operation time is not set. You can set the Off timer by pressing the buttons to turn off the mode automatically at the appointed time within a range of 30 minutes to 12 hours. Each time the buttons are pressed, the time is mode will be increased by 30 minutes or 1 hour. When the air conditioner is turned on, The indicator on the indoor unit display appears and the Auto cleaning function runs after stopping the air conditioner operation. Mode Auto(cool), Cool, Dry Auto(heat), Heat, Fan Operating time 30 minutes 15 minutes Control Panel Caution Auto cleaning operating time varies according to the mode you selected before the air conditioner turned off. Note The Auto Cleaning indicator appears only on the indoor unit display. When the air conditioner is turned on, the Auto cleaning function runs after stopping the air conditioner operation. Setting the On Timer You can set the On Timer to turn on the air conditioner automatically at the appointed time within a range of 30 minutes to 24 hours. 1 Press the button . 2 Press the or buttons until the desired time is displayed to set the On Timer. You can set the time between 0. 5 hour and 24 hours. 3 Press the Result: button to complete the setting. The selected mode and the temperature on the display disappear after 10 seconds. The air conditioner turns on automatically at the appointed time and the On Timer setting disappears. 4 Press the button until the desired mode is displayed at the top of the remote control to select the mode in advance. Result: Note The air conditioner operates in the selected mode when it is turned on. The most recently used function is set between On and Off Timer to turn on/off the air conditioner and mode. On Timer of mode cannot be set out separately. To Cancel the On Timer 1 Press the Note button to cancel the On Timer. If you press the button, both the On Timer and the Off Timer are canceled. E-22 Setting the Off Timer ENGLISH E-23 You can set the Off Timer to turn off the air conditioner automatically at the appointed time within a range of 30 minutes to 24 hours. 1 2 Press the button . Press the or buttons until the desired time is displayed to set the Off Timer. [. . . ] Check if the remote control is for cooling only model. Check if set temperature higher(lower) than current temperature. Select the Cool, Heat, Auto or Dry mode. Check if the air filter is blocked by dirt. [. . . ]