User manual LG FPD1940

[. . . ] The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. 1 Safety Precautions 2 Safety Precautions 3 Safety Precautions Please read these safety precautions carefully before using the product. Warning If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. Caution If you ignore the caution message, you may be slightly injured or the product may be damaged Precautions in installing the Product Warning Keep away from heat sources like electrical heaters. - Electrical shock, fire, malfunction or deformation may occur. Keep the packing anti-moisture material or vinyl packing out of the reach of children. [. . . ] · User : Select this option to use the user-defined audio settings. User 120Hz 200Hz 500Hz 1. 2KHz 3KHz 7. 5KHz 12KHz AVL To adjust uneven sound volumes across all channels or signals automatically to the most appropriate level. To use this feature, select On. Balance Use this function to balance sound from the left and right speakers. Speaker You can adjust internal speaker status. If you want to use your external hi-fi stereo system, turn off the internal speakers of the set. Note When connected to your computer and the 'SSM' setting in the audio menu is Flat, Music, Movie or Sports, the available menus are Balance, AVL and Surround MAX . 24 Selecting and Adjusting the Screen Adjusting the timer function Clock Off time On time Auto sleep Clock If the time is on the clock is incorrect, reset the clock manually. 1) Press the MENU button and then use 2) Press the button and then use button to select the Clock menu. 3) Press the button and then use button to set the hour(00~23). 4) Press the button and then use button to set the minutes(00~59). Off / On time The off time automatically switches the set to standby at the pre-set time. 1) Press the MENU button and then use 2) Press the button and then use 3) Press the button and then use 4) Press the button and then use 5) Press the button and then use button to select the TIME menu. button to select On or Off. Auto sleep If Auto sleep is active and there is no input signal, the set switches to standby mode automatically after 10 minutes. 1) Press the MENU button and then use 2) Press the button and then use button to select On or Off. Note In the event of power interruption (disconnection or power failure), the clock must be reset. Once the on or off time is set, these functions operate daily at the preset time. Off time function overrides On time function if they are set to the same time. The set must be in standby mode for the On time to work. - Configuration of an integration screen is also available as well as configuration of One by one Display. - Tile mode (product 1 ~ 4) : r(2) x c(2) row ID 1 ID 2 column ID 3 ID 4 27 Selecting and Adjusting the Screen Selecting the options - Tile mode (product 1 ~ 9) : r(3) x c(3) row ID 1 ID 2 ID 3 ID 4 ID 5 ID 6 column ID 7 ID 8 ID 9 - Tile mode (product 1 ~ 2) : r(2) x c(1) row ID 1 ID 2 column - Tile mode (product 1 ~16) : r(4) x c(4) row ID 1 ID 2 ID 3 ID 4 ID 5 ID 6 ID 7 ID 8 column ID 9 ID10 ID 11 ID 12 ID 13 ID 14 ID 15 ID 16 28 Selecting and Adjusting the Screen Selecting the options Language Child lock ISM Method Set ID Tile Mode Power Indicator Logo light Demo Tile Mode Tile ID H-Size V-Size H-Position V-Position Reset Off 0 0 0 To set · Tile ID · H Size · V Size · H-Position · V-Position · Reset Select the location of the Tile by setting an ID. Adjust the horizontal size of the screen taking into account the size of the bezel. Adjust the vertical size of the screen taking into account the size of the bezel. Moving the screen position horizontally. Function to initialize and release Tile. All Tile setting are released when selecting Tile recall and the screen returns to Full screen. Power Indicator Use this function to set the power indicator on the front side of the product to On or Off. If you set On at any time, the power indicator will automatically be turned on. Use this function to set the Logo Display Lamp on the front side of the product to On or Off. If you set On, the lamp will automatically be turned on. Use it to see the difference between XD demo on and XD Demo off. (XD Demo function is not available in RGB PC/ HDMI/DVI PC mode. ) Logo Light Demo 29 Selecting and Adjusting the Screen Adjusting Screen CLOCK/PHASE and Position Auto config. [. . . ] Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 1H : Inversion 2H : Orbiter 3H : Orb. +Inv. 4H : White Wash 8H : Normal L Acknowledgement [p][ ][Set ID][ ][OK][Data][x] A11 RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 18. Auto Configure(Command: j u) To adjust picture position and minimize image shaking automatically. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 1 : To set Acknowledgement [u][ ][Set ID][ ][OK][Data][x] L 19. [. . . ]