User manual LG FR-656A

[. . . ] Do NOT insert anything between the air flow blades, as the inner fan may be damaged and you may be hurt. Keep children away from the indoor unit. Do NOT place any obstacles in front of the outdoor unit. If the remote control will not be used for a long time, remove the batteries. [. . . ] x For the first three to five minutes, the fan operates very slowly until the air has been sufficiently warmed. Once the correct temperature has been reached, the fan is automatically set to the required speed. 5 To control the direction of the air flow, refer to page 14 and 15. E-10 Changing the Room Temperature Quickly ENGLISH The Turbo cooling/heating function is used to cool or heat your room as quickly as possible. Example : You have just come home and find that the room is very hot. You wish to cool it down as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected. 1 If necessary, press the Result: (On/Off) button. x The OPERATION indicator on the indoor unit comes on. x The air conditioner starts up in the mode selected when the unit was last used. x The indoor unit beeps. 2 Press the Result: x x x x button. The temperature and fan settings are adjusted automatically. The TURBO indicator on the indoor unit comes on. The air conditioner cools or heats the room as quickly as possible. After 30 minutes, the air conditioner is reset automatically to the previous mode, temperature and fan settings. Result: x Each time you press OFF TIMER button: - The time is adjusted by 0. 5 hour to 5 hours, by 1 hour from 6 hours to 24 hours. 2 Press the Result: (Set/Cancel) button to complete the setting. x Blinking of the timer indicator stops. x The selected mode and the temperature disappear on the display after 5 seconds. x The TIMER indicator on the indoor unit lights up yellow. x The air conditioner will switch off automatically when the counter displayed on the remote control reaches the setting time as disappearing the Off timer setting. Example If you would like to turn the air conditioner on after 2 hours and to operate it for 2 hours: 1. Press the ON TIMER button until `2. 0 Hr' is displayed. Press the OFF TIMER button until `4. 0 Hr' is displayed. Note Yon can see or change the setting mode and/or the temperature by pressing the MODE button or the TEMPERATURE buttons after setting the Off timer. To Cancel the Off Timer 1 To cancel the Off Timer, press the OFF TIMER button one or more times until the timer setting disappears. 2 Press the (Set/Cancel) button. Note If you want to turn off the air conditioner before the timer reaches the setting time, press the (ON/OFF) button. E-17 Setting the Sleep Timer The Sleep Timer can be used when you are cooling or heating your room to switch the air conditioner off automatically after a period of six hours. Note If you wish to switch the unit off at a specific time, refer to page 17. 1 2 Make sure that you have selected either COOL or HEAT mode. Press the button one or more times until remote control. Result: appears on the x The indoor unit beeps. [. . . ] x The removal of the front grille facilitates your cleaning the air conditioner. After opening the front grille, lift up to the max, push slightly to the left, and pull down to release them and vice versa. 2 3 4 Front grille 5 Note Hook Body groove E-20 Solving Common Problems ENGLISH E-21 Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call. Problem The air conditioner does not operate at all Explanation/Solution x Check that the breaker used for the air conditioner is switched on. [. . . ]