User manual LG FRS640D3F1B

[. . . ] • This manual is intended to prevent product damage and protect the user’s safety. Interior wiring LIVE LIVE LIVE LIVE of the building P. E. NEUTRAL NEUTRAL Wire connectors Product’s power cables 1 Drill and prepare the ceiling so the hole is smaller than the product. 2 Safety Precautions WARNING • Violation of warnings may lead to serious injury or death. [. . . ] Do not use for underwater lighting purposes. (Underwater landscape, searchlight, fishing, events, etc. ) • Risk of fire and electric shocks. Must fix the product properly on the ceiling. • Risk of product dropping and causing injury to the user. 1 Drill and prepare the ceiling so that the hole is smaller than the product. 2 Connect the 3 product cables to the interior wiring of the building. For wire connectors, use standardized products. 3 Check the installation location. 4 Fix the product by using woodscrews. • Check to see that the product is fixed into place. 5 Perform a lighting test to see if the product is working properly. • After the installation is complete, remove the protective sheet. If the lamp turns off by itself, do not disassemble the product. Contact your local LGE sales representative for repair. • Risk of electric shock and product malfunctioning. Do not stare directly at the lamp when turned on. • Strong light may cause visual impairment. Do not expose the product to water when cleaning it. • Risk of fire and electric shock. Dimming Terminal Connection To dim the lamps, a compatible dimmer should be used. The use of incompatible dimmers will result in damage to the products. Before installing dimmers, verify the compatible dimmer list with your local LGE sales representative. Do not use if the product has been dropped or exposed to shock. • Risk of product malfunctioning. Must have at least two or more people working during installation. • Risk of product dropping and causing injury to the user. Product is heavy. Use a trolley when transporting the product. • Dropping the product may cause product damage and malfunction. Pin No. 1 Output Name 0~10V GND ※ When each cable is inserted into the dimming connector socket, the wire which removes the covering must not come into contact with the case. 2 1 2 CAUTION • Violation of precautions may lead to light injury or product damage. Do not clean the product with inflammable substances such as alcohol, benzene, and acetone that may alter the surface. Do not install where it may be exposed to direct sunlight, humidity, or dust. ※ Wire dimming function is included. (0-10V) ※ Please use wire with designated thickness. (24-20AWG) ※ Be careful of the polarity for correct dimming control. [. . . ] NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO THE PRODUCT AFTER THE APPLICABLE PERIOD OF THE EXPRESS LIMITED WARRANTY STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BIND LGE. (SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. ) It flickers. Turn the power off. [. . . ]