User manual LG GB5237TIGW

[. . . ] If a 13 amp(BS 1363) plug is used, fit a 13 amp BS 1362 fuse. Registration The model and serial number are found on the rear of this unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Date of Purchase : : Dealer Purchased From Dealer Address Dealer Phone No. [. . . ] Install accessories such as ice cube box, etc. , in their proper places. They are packed together to prevent possible damage during shipment. 7. Connect the power supply cord (or plug) to the outlet. Don't double up with other appliances on the same outlet. Starting When your fridge-freezer is installed, allow it 2-3 hours to stabilize at normal operating temperature prior to filling it with fresh or frozen foods. If power plug is disconnected, allow 5 minutes delay before restarting. Your fridge-freezer is now ready for use. 17 Operation Temperature Control Your fridge-freezer has controls that let you regulate the temperature in the fridge and freezer compartments. Display Panel For Temperature Control Adjusting the temperatures and functions Express Frz. , Eco Friendly LCD Model Temperature Adjustment Button for Freezer Compartment Temperature Adjustment Button for OPTI-Zone (Chill) Compartment Temperature Adjustment Button for Refrigerator Compartment LED Model Express Frz. Eco Friendly LED Model Lock Button On/Off Button LED Model Note All adjust function of LCD Model is operated after pressing any button. 18 Operation ENGLISH Display Panel For Temperature Control Adjusting the temperatures and functions Temperature Adjustment Button for Freezer Compartment Express Frz. Child Lock / Door Alarm Temperature Adjustment Button for Fridge Compartment Eco Friendly On/Off Button Express Frz. Temperature Adjustment Button for Freezer Compartment Temperature Adjustment Button for Fridge Compartment Eco Friendly 19 14 Operation How to adjust the temperature in the refrigerator and freezer compartment • The initial temperature of the freezer and refrigerator Compartment is -20°C and 3°C respectively. You can now adjust the temperature of the compartments as you want. OPTI-Zone (Chill) (Optional) • By pressing the button, store vegetables, fruits (at relatively low conservation temperature) or other types of food such as meat to be defrosted. Method to Use • You can select optimum temperature range depending on types of food stored. LCD Model LED Model LED Model < Exterior Type > • 2 Step of temperature selection including vegetables, Fruits (2°C) and meat and fish (-1°C) is available. • Vegetable and cold storage foods requiring humidity Maintenance and meats/fishes can be more freshly stored depending on type of foods stored. For “ON” press the “ON/OFF” button for 1 secs. ) 2. Lean the Cover, Assembly slightly to one side. Pull out the Cover, Assembly. 22 18 Operation ENGLISH Vita Light (Optional) How to separate the vegetable drawer or opti-zone drawer (Optional) 1 1. LED lamp is operated automatically for all day. It may makes vegetable to photosynthesize. Vita-Light is located at the rear of the vegetable drawer. • Viewing the laser out put with certain optical instruments (e. g. telescopes, binoculars, glasses, magnifyier) may pose an eye hazard. • The LEDs will operate automatically. Contact qualified service technician if there is any failure in LEDs. For Rail Model When separating the vegetable and opti-zone drawer, pull the vegetable toward you and then lift the drawer up with both hands. Door Alarm • When the door of the fridge is opened for a while, the alarm sounds. Please contact with the local service center if warning continue to sound even after closing the door. [. . . ] After unlocking the clamp and remove it, clean and fully rinse the inside/outside part of the water tank by using neutral cleansing agent. Cap assembly tank & Cap tank Clean and fully rinse the cap assembly tank & cap tank by using neutral cleansing agent. Especially for the groove part of the cap tank, it is convenient to cleanse it by using a small brush. Interior Same as above. After Cleaning Check that the power cord is not damaged, power plug has not overheated, and that the power plug is tightly inserted into the outlet. w CAUTION Don’t separate the screw and tube from the cap assembly tank. Please clean the out surface. w WARNING Be sure to dry the appliance with a cloth after washing it with water. Do not use abrasive, petroleum, benzene, thinner, hydrochloride acid, boiling water, rough brush, etc, as they may damage parts of the fridge-freezer. Drip Tray Wipe moisture out around the door part and the drip tray using a clean cloth. Exterior Dispenser Wipe moisture out of dispenser and on the dispenser pad using a cloth. 32 Trouble Shooting Trouble Shooting ENGLISH Before calling for service, check this list. [. . . ]