User manual LG GBB539PVHPB

[. . . ] “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. ENGLISH ENG The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx. com for more information and software tools to convert your files into DivX video. [. . . ] Otherwise, this may cause damage to the DC cable or product. CAUTION 3 USB Apps MAKING CONNECTIONS 23 NOTE Connect the TV to a wall antenna socket with an RF yy The external device connection may differ cable (75 Ω). yy Connect external devices to the TV NOTE regardless of the order of the TV port. yy If you record a TV program on a DVD yy a signal splitter to use more than 2 TVs. Use recorder or VCR, make sure to connect the yy the image quality is poor, install a signal amplifier If TV signal input cable to the TV through a properly to improve the image quality. For more information yy the image quality is poor with an antenna conIf of recording, refer to the manual provided nected, try to realign the antenna in the correct with the connected device. IN AV yy Refer to the external equipment’s manual for yy2 antenna cable and converter are not proAn COMPONENT VIDEO vided. yy If you connect a gaming device to the TV, use yy Supported DTV Audio: MPEG, Dolby Digital, the cable supplied with the gaming device. Dolby Digital Plus, HE-AAC yy In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, IN change IN/OUT IN OUT 13/18V (PC) (RGB/DVI) (RGB) (Only satellite models)ANTENNA OPTICAL H/P 700mA Max the PC output to another resolution, change LNB IN DIGITAL LAN RGB AUDIO AV1 Satellite / CABLE AUDIO the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. yy In PC mode, some resolution settings may not work properly depending on the graphics card. SATELLITE LNB ANT. /CABLE Connect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device. AV 2 COMPONENT NOTE yy Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB IN port on the TV directly. yy Connect the external power source if your USB is needed. Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown. LAN yy not look into the optical output port. LookDo ing at the laser beam may damage your vision. yy Audio with ACP (Audio Copy Protection) function may block digital audio output. OPTICAL AUDIO OUT IN/OUT IN CAUTION (RGB/DVI) (RGB) RGB AUDIO AV1 (PC) IN ANTENNA OPTICAL H/P DIGITAL Satellite / CABLE AUDIO 13/18V 700mA Max LNB IN OUT AV1 IN/OUT ANTENNA / CABLE IN Digital optical audio connection VIDEO AUDIO PR PB Y (MHL) 4 ENGLISH ENG HDD (*Not Provided) (*Not Provided) USB Hub (*Not Provided) USB (*Not Provided) Digital Audio System Connect a USB storage device such as a USB flash memory, external hard drive or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. You may use an external audio system instead of the built-in speaker. 3 USB Apps /DVI IN CI module connection AV 2 VIDEO Headphone connection PB Y (MHL) 4 MAKING CONNECTIONS 29 ENGLISH ENG IN COMPONENT PR AUDIO (*Not Provided) IN LAN RGB (PC) PCMCIA CARD SLOT AUDIO (RGB/DVI) IN/OUT AV1 (RGB) IN ANTENNA OPTICAL DIGITAL Satellite / CABLE AUDIO 13/18V 700mA Max LNB IN OUT ANTENNA / CABLE IN H/P 3 USB Apps /DVI IN 4(MHL) (*Not Provided) AV 2 IN COMPONENT PR PB Y AUDIO 2 3 PCMCIA CARD SLOT Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown. 1 (ARC) T IN ANTENNA OPTICAL H/P DIGITAL Satellite / CABLE AUDIO 13/18V 700mA Max LNB IN OUT NOTE yy AUDIO menu items are disabled when connecting a headphone. yy Optical digital audio out is not available when connecting a headphone. yy Headphone impedance: 16 yy Max audio output of headphone: 9 mW to 15 mW yy Headphone jack size: 0. 35 cm View the encrypted (pay) services in digital TV mode. This feature is not available in all countries. T Y 2 /DVI IN 3 yy Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot. 4(MHL) NOTE 30 REMOTE CONTROL REMOTE CONTROL ENGLISH ENG To replace batteries, open the battery cover, replace batteries (1. 5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. [. . . ] Set ID = All = 00 Data 00 & 01 = Channel Data is 1 = 00 01 Data 02 = Digital Terrestrial TV = 10 Result = ma 00 00 01 10 3. Tune to the satellite (DVB-S) Channel 1000. Set ID = All = 00 Data 00 & 01 = Channel Data is 1000 = 03 E8 Data 02 = Digital Satellite TV = 40 Result = ma 00 03 E8 40 Ack [a][ ][Set ID][ ][OK][Data 00][Data 01][Data 02][x] [a][ ][Set ID][ ][NG][Data 00][x] Data 05: Input Source (Analogue) - 00 : Terrestrial TV (ATV) - 01 : Cable TV (CATV) * Digital Terrestrial/Cable Data 00 : xx (Don't care) [Data 01][Data 02]: Major Channel Number Data 01 : High byte Channel Data Data 02 : Low byte Channel Data - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) [Data 03][Data 04]: Minor Channel Number Data 03 : High byte Channel Data Data 04 : Low byte Channel Data Data 05 : Input Source (Digital) - 02 :  errestrial TV (DTV) – Use Physical Channel T Number - 06 :  able TV (CADTV) – Use Physical Channel C Number - 22 :  errestrial TV (DTV) – Don’t Use Physical T Channel Number - 26 :  able TV (CADTV) - Don’t Use Physical C Channel Number - 46 :  able TV (CADTV) – Use Major Channel C Number Only (One Part Channel) Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0). * Tune Command Examples: 1.  une to the analogue cable (NTSC) channel 35. T Set ID = All = 00 Data 00 = Channel Data is 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = Analogue Cable TV = 01 Total = ma 00 23 00 00 00 00 01 2.  une to the digital terrestrial (ATSC) channel 30-3. [. . . ]