User manual LG GBB539PZQZS

[. . . ] 2 2 1 Attach the stand to the TV using the upper mounting hole on the back of the TV. 2 Attach the stand to the TV using the lower connection on the back of the TV. M4 x L14 M4 x L20 (Only 32LB65**ZA) 4EA A-4 SETTING UP THE TV 2 2 4EA M4 x L14 4EA LB63**-ZL, LB65**-ZK M4 x L14 M4 x L20 (Only 32LB65**ZK) 1 A stand base 32/39LB65**-ZE/ZN 1 B stand base 1 2 4EA M4 x L20 1 1 Attach the stand to the TV using the upper mounting hole on the back of the TV. 2 Attach the stand to the TV using the lower connection on the back of the TV. [. . . ] Generated Sound “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. This generated sound does not affect the performance and reliability of the product. 10 SAFETY INSTRUCTIONS Viewing 3D Imaging (Only 3D models) ENGLISH WARNING Viewing Environment Viewing Time - When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness Some users may experience a seizure or other abnormal symptoms when they are exposed to a Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc. 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. double images or discomfort in viewing may be experienced. If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals. 12 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING ENGLISH 1 2 3 4 * NOTE Image shown may differ from your TV. Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. The available menus and options may differ from the input source or product model that you are using. New features may be added to this TV in the future. The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption. The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. INSTALLATION PROCEDURE Open the package and make sure all the accessories are included. connect an external device to the TV set. Make sure the network connection is available. [. . . ] Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in scratches and image distortions. Do not use any chemicals as this may damage the product. If water enters the TV, it may result in fire, electric shock, or malfunction. Power cord Remove the accumulated dust or dirt on the power cord regularly. [. . . ]