User manual LG GCC-5240P

[. . . ] 3 0 This symbol guides you step by step through the operating procedure for your appliance. 3 2 After this symbol you receive supplementary information on the practical application and use of the appliance. Tips and information about the economical and environmentally friendly use of the appliance are marked with the clover. Description of the appliance Hand mixer with accessories 1. On/Off switch for continuous and instant operation 2. Button to release the attachments 3. Dough hooks 4. Whisk 5. Quick mix rod 6. Mini chopper 7. Attachment holder for whisk, dough hooks and drive of the mini chopper 8. Attachment holder for quick mix rod 9. Slide for the quick mix rod holder 10a. Open the slide 10b. Insert the quick mix rod 10c. Tighten the quick mix rod 11a. Insert the blade into the mini chop per 11b. Place the drive unit onto the mini chopper When using your hand mixer · Never use the mixer if you have wet hands. · Plastic parts may not be placed on or directly near to heaters. · On no account should you push the lead into the hand mixer manually as the automatic lead winder could get damaged. [. . . ] Installation, connection and initial use · The attachments are only to be inserted into or removed from the appliance when it is switched off. · The hand mixer can process ingredients in any bowl. However standard plastic mixing bowls are best suited if they are sufficiently high, with smooth edges and are slip proof. · Never switch on the appliance until the working attachments are in the mixing bowl with the ingredients to be processed. Always wait until the attachments stop before you remove the bowl. · Do not hold any hard objects (e. g. a spoon, knife or whisk) against the moving attachments and do not touch them with your hand. · When you have finished working with the appliance, switch it off and unplug it from the electricity supply. 2 Disposal Dispose of the packaging!Dispose of the packaging material of your appliance correctly. All packaging materials are environmentally friendly and can be disposed of without any danger or burnt in the refuse incinerator. The boxes are made from recycled paper and should be returned to the old paper collection. This releases the lead again and it ist wound up by the automatic lead winder. Guide the lead with your hand whilst it ist being wound up. 1 On no account should you push the lead into the hand mixer manually as the automatic lead winder could get damaged. Switch on the hand mixer 1 Never switch the hand mixer on when no attachments have been inserted. Using the on/off switch (1) ­ you can switch the appliance on and off, ­ you can infinitely adjust the motor speed, ­ you can choose the instant setting "M". In the instant setting "M" the hand mixer works as long as you push the on/off switch to the left. The appliance runs at top speed for as long as the switch is activated. 1 Risk of injury: the chopping blade (11a) is very sharp. Only hold it by the plastic part. 01. Attach the chopping blade (11a) onto the axle of the mini chopper. Attach the non-slip rubber ring on the exterior of the bottom of the mini chopper. Fill the food to be processed into the mini chopper. Attach the drive unit onto the mini chopper (11b), so that the markings on the drive unit and the mini chopper are opposite each other. 5 3 ­ Start all work at the lowest speed. Use the instant setting, repeatedly release the on/off switch (pulsing). [. . . ] Do not use your mixer for extremely hard foodstuffs such as ice cubes, nutmeg and coffee beans. When working with meat, check that all bones, tendons and gristle have been removed. Before filling cooked food into the mini chopper, let it cool down for a few minutes. Exception: mashed potato becomes fluffier if all ingredients are processed hot. Accessories Whisk and dough hooks 0 Clean the whisk and dough hooks with a brush or cloth under running water or in the dishwasher! [. . . ]