User manual LG GR-051KBB

[. . . ] Take out power plugs, separate connection wires and remove or destroy all springs, latches or bolting, to prevent children from being trapped during play. For environmental protection, old refrigerators should be disposed off by a professional disposition agency. If you have any question, please consult with the local sale agency or local authority. All packing materials used for this appliance are environment-friendly. [. . . ] If the floor is not even, adjust the feet by using the leveling screw at the front edge of the cabinet. If the front is slightly higher than the rear, the door can close more easily. 8 Installation Electrical connection This appliance should be connected to the mains AC 220~240V , 50 Hz. You must connect this appliance only to the power socket with grounding complying with the related regulations and only an approved expert should install this appliance. Operation Starting Before switching it on, leave the appliance standing for at least 2 hours, so that the circulation of the refrigerant stabilizes and no operating problems occur. °C h When the appliance powers on, the initial state displayed on LED is "-18°C". Button K1 (Defrost): Press button K1 for three seconds the first time, indicator "-", "°C", "h" shut off, compressor stop running and the value displayed on LED is"OF". Press button K1 for three seconds the second time , indicator "-", "°C", "h" display normally, compressor running normally and LED displays the initial state. Button K2 (Quick freezing): Press butoon K2 for the first time, indicator "-", "°C"shut off, indicator "h" light on and initial freezing time displayed is"3h". Press button K2 for the second time the freezing time displayed is "2h". Press button K2 for the third time the freezing time displayed is "1h". The compressor will ren from 1hour to 3 hours according to the freezing time displayed on LED. Press button K2 for the fourth time, the indicators will recover the state before quick freeze. Button K3 (Temperature regulation): Press button K3 continuously, the provided temperature displayed will be from -14°C to -24°C circularly. 9 Suggestion on food storage Storing food Opening the door often or keeping the door opened a long time, increases the inside temperature. Clean the drain inlet using objects like a toothpick so that the drain inlet is not clogged. Care should be taken so that cleaning water does not overflows in the drain tub. Regularly clean the heat exchanger on the rear side of refrigerator using a smooth brush so that accumulations of dusts and residues. Do not disrupt expansion from the inside and cause increased energy consumption. Any damage to the heat exchanger or other events leading to the exposure of the refrigerant to the environment, should be avoided because of potential environment and health risks. 12 Care and Maintenance General information Going away When you plan to be away for an extended period, remove all food, disconnect the power cord, clean the interior thoroughly, and leave the door OPEN to prevent odor formation. Most power failures are corrected in an hour or two and will not affect your refrigerator temperatures. However, you should minimize the number of door openings while the power is OFF. During power failures of longer duration, place a block of dry ice on top of your frozen packages. Remove all items inside the refrigerator or securely fasten all loose items. To avoid damaging the leveling screw, turn them all the way into the base. · The Anti-condensation pipe is installed around the front side of fridge-freezer to prevent dewing. [. . . ] · House fuse has blown or circuit breaker has tripped. Check and/or replace fuse and reset circuit breaker. Check house lights. Vibration or Rattling or Abnormal Noise · The floor on which the fridge-freezer is installed may be uneven or the fridge-freezer may be unstable. Make it even by rotating the leveling screw. [. . . ]