User manual LG GR-181GPPXASKQNP

[. . . ] · Because these following operating instructions cover various models, the characteristics of your refrigerator may differ slightly from those described in this manual. WARNING These warning signs are here to prevent injury to you and others. After reading this section, keep it in a safe place for future reference. CE Notice This product has been determined to be in compliance with the Low Voltage Directive (2006/95/EC), the Electromagnetic Compatibility Directive (2004/108/EC) and the Eco-Design Directive(2009/125/EC) implemented by Regulation (EC) No 643/2009 of the European Union. SEVERE WARNING SIGNS FOR INSTALLATION Important safety symbols and precautions : Hazards or unsafe practices that may result in severe personal injury or death. Hazards or unsafe practices that may result in minor personal injury or property damage. WARNING CAUTION Do NOT attempt. Unplug the power plug from the wall socket. [. . . ] - Allow warm food to cool down before placing it in the appliance. - Put frozen food in the refrigerator to thaw. You can then use the low temperatures of the frozen products to cool food in the refrigerator. - Do not keep the door of the appliance open for too long when putting food in or taking food out. The shorter time for which the door is open, the less ice will form in the freezer. - Clean the rear of the refrigerator regularly. - Do not set temperature colder than necessary. - Ensure sufficient air exhaust at the refrigerator base and at the back wall of the refrigerator. - Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower. ADDITIONAL TIPS FOR PROPER USAGE · In the event of a power failure, call the local office of your Electricity Company and ask how long it is going to last. - Most power failures that are corrected in an hour or two will not affect your refrigerator temperatures. Disconnect the wires and then remove 3 bolts. 01 SETTING UP Required Tools (Not provided) WARNING Make sure your refrigerator is unplugged before handling electrical wires. Phillips Head Driver (+) Flat Head Driver (-) 10mm Socket Wrench (for bolts) 4. After reassembling the hinge, wire and the hinge cover, switch the side from right to the left. Grommet 10. Remove the wire cover on top of the refrigerator door to switch the side of the wires. 14. After switching the hinge, close it with the wire cover on the top of refrigerator door. "Cover Wire Door R" can be found in the packaging 8_ setting up 15. Take off the handle cover and remove the screws, make sure to detach the caps and the handle from the left to right side of the door. (Make sure to cover the left side with detached caps. ) 19. Tighten 2 screws back to its place. 01 SETTING UP 20. Detach the Fridge and the Freezer door gaskets and then attach them after rotating them 180°. Handles may not have cover depending on the models. 16. Switch the hinge cap and attach the front leg cover. Carefully put the refrigerator door back on. · After reversing the doors, make sure the Fridge and Freezer door gaskets are WARNING properly arranged. If not, there might be a noise or dew formed which affects perfomance of the refrigerator. Hinge cap LEVELLING THE REFRIGERATOR If the front of the appliance is slightly higher than the rear, the door can be opened and closed more easily. [. . . ] · A ticking sound may be heard inside the appliance; this is normal. This sound occurs when the various accessories contract or expand. · Heat-proof pipes are installed in the front corners of the appliance to prevent condensation from forming. When the surrounding temperature rises, this may not always be effective. [. . . ]