User manual LG GR-181LA

[. . . ] Leave the shelves in place so that children may not easily climb inside. In the event of an electric short circuit, grounding (earthing) reduces the risk of electric shock by providing an escape wire for the electric current. In order to prevent possible electric shock, this appliance must be grounded. Improper use of the grounding plug can result in an electric shock. [. . . ] Before switching it on, leave the appliance standing for at least 2 hours, so that the circulation of the refrigerant stabilizes and no operating problems occur. Turn the temperature control dial from the position "0". The refrigerating process begins and the lamp inside refrigerator goes on when the door is opened. Too warm : Turning the Wa rm temperature control dial clockwise will set to a colder setting (higher number setting). 6 Too cool : Turning the temperature control Co dial counterclockwise will set to a warmer setting (lower number setting). The temperature setting depends on ambient temperature, the quantity of foods, how often the door is opened. So the temperature setting should be checked by using an appropriate thermometer and following the Turn the temperature control dial counterclockwise until set to "0". The refrigerating process stops and the lamp inside refrigerator goes off. Opening the door often or keeping the door opened a long time, increases the inside temperature. This causes the storage life and flavor of the foods to reduce, and increases the energy consumption. Arranging food - Store the food products that give off odor in closed containers and wrap. - Use aluminum foil , plastic foil and metal or glass containers as the packing material for foods. - Allow warm foods to cool down sufficiently before placing inside the appliance. - Keep high-proof alcoholic beverages in airtight bottles and upright position. - Do not store the products (melon, banana, pineapple etc) which are likely to go bad at low temperature. Defrosting the fridge compartment When the refrigerator is working, frost is formed at the rear wall of the fridge compartment and melts automatically when the compressor stops. Take care when using defrosting sprays for assisting defrosting. These sprays include substances containing explosive gas, or harmful for synthesis or human health. Always remove plugs or Switch off supply before cleaning. Do not use sharp objects (such as knife, screwdriver) which could break refrigerant circuit resulting in environmental and health risks. Never use steam cleaner or steam pressure cleaner since hot steam may damage refrigerator surface and electrical devices. Care should be taken that cleaning water does not enter the inside of the thermostat Enclosure or lamp. [. . . ] Remove foods and accessories like shelves or trays which are not fixed in the refrigerator. Use `+' driver or spanner to fix or remove the bolts. Before refitting the door, swap the Hinge Cap by pulling it out from its current location and repositioning it on the other side of the door. Care should be taken not to damage the adjacent surfaces when removing the Hinge Cap. [. . . ]