User manual LG GR-205NP

[. . . ] x Never spill any kind of liquid on the air conditioner. If this happens, unplug or turn off the air conditioner and contact an authorized service center. x Do not insert anything between the airflow blades to prevent damage of the inner fan and consequent injury. Keep children away from the air conditioner. [. . . ] ) 4 Press the is displayed. 5 To control the airflow direction, refer to pages 16 and 17. E-11 Selecting the Dry Mode You can select the Dry mode if you want to dehumidify your room. You can adjust the temperature in this mode. 1 If necessary, press the Result: button. x The operation indicator on the indoor unit lights up. x The air conditioner starts up in the mode you selected last. x The indoor unit beeps. 2 Press the Result: button on the remote control until is displayed. button. x The indoor unit beeps each time you press the x The air conditioner runs in the Dry mode. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 16°C and 30°C. Result: x Each time you press the button: - The temperature is adjusted by 1°C - The indoor unit beeps x The air conditioner starts dehumidifying and the fan speed is adjusted automatically. 4 To control the airflow direction, refer to pages 16 and 17. E-12 Selecting the Fan Mode ENGLISH You can select the Fan mode if you want to ventilate your room. It helps to refresh the air in your room. You can adjust the fan speed in this mode. 1 If necessary, press the Result: button. x The operation indicator on the indoor unit lights up. Press the Note button until `2 Hr' is displayed. button. You can check or change the mode and/or the temperature by pressing the button or the button after setting the Off Timer. To Cancel the Off Timer Press the Note button to cancel the Off Timer. button, both the On Timer and the Off Timer E-19 Setting the Sleep Timer You can set the Sleep Timer to turn off the air conditioner automatically while you are sleeping. The air conditioner stops operating 6 hours after you set the Sleep Timer. 1 Press the Result: button until the indicator appears on the remote control. x The indoor unit beeps. x The air conditioner will be controlled as indicated in the illustrations below. You can set Sleep Timer only in the Cool or Heat mode. Note Cooling The temperature is increased by 1°C every hour. After the increase of 2°C, the temperature is maintained for 4 hours. Heating The temperature is decreased by 1°C every hour. After the decrease of 2°C, the temperature is maintained for 4 hours. To Cancel the Sleep Timer Press the Result: button to cancel the Sleep Timer. x The air conditioner operates normally. E-20 Setting the 1 Hour Timer ENGLISH You can set the 1 Hour Timer to turn off the air conditioner automatically after an hour. It is the quick and convenient way using only one button. [. . . ] If so: - Wait until the set time is reached and the air conditioner starts automatically. (See pages 18 and 19 for further details) x Check if there are no obstacles in front of the indoor unit. x Make sure that you are within 7 meters from the indoor unit. x Check if you are pointing the remote control at the remote control sensor on the right side of the indoor unit. [. . . ]