User manual LG GR-3222W

[. . . ] x Never spill any kind of liquid on the air conditioner. If this happens, turn off the air conditioner and contact an authorized service center. x Do not insert anything between the airflow blades to prevent damage of the inner fan and consequent injury. Keep children away from the air conditioner. [. . . ] Note The fan speed indicator of the indoor unit varies according to the temperature in the Automatic fan speed. ) Control Panel 5 To control the airflow direction, refer to page 19. E-11 Selecting the Dry Mode You can select the Dry mode if you want to dehumidify your room. You can adjust the temperature in this mode. 1 If necessary, press the Result: (On/Off) button. x The operation indicator on the indoor unit lights up. x The air conditioner starts up in the mode you selected last. x The indoor unit beeps. 2 Press the Result: button on the remote control until is displayed. button. x The indoor unit beeps each time you press the x The air conditioner runs in the Dry mode. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 18C and 30C. Result: The air conditioner is reset automatically to the previous setting. 4 To control the airflow direction, refer to page 19. E-14 Selecting the Energy Saving Function ENGLISH You can select the Energy Saving Function to save energy when cooling. The temperature range decreases in order to perform this function. 1 If necessary, press the Result: (On/Off) button. x The operation indicator on the indoor unit lights up. 1 Press the Result: button until the required direction is set. The outer blade is adjusted vertically. 2 Press the button again to move the blade up and down automatically during operation. 3 Press the Note button again to stop the blade moving up and down. set to the default position. Adjusting the Airflow Direction Horizontally You can adjust the airflow direction horizontally manually. The inner blades with small fins moves the air in the required direction. 1 Adjust the inner blades by moving them to left or right. E-19 Setting the On Timer You can set the On Timer to turn on the air conditioner automatically at the appointed time. You can set the time from 30 minutes to 24 hours. 1 Press the button until the required time is displayed to set the On Timer. You can set the time between 0. 5 hour and 24 hours. 2 Press the Result: button to complete the setting. x The selected mode and the temperature on the display disappear after 10 seconds. x The air conditioner turns on automatically at the appointed time and the On Timer setting disappears. 3 Press the button until the desired mode is displayed at the top of the remote control to select the mode in advance. Result: The air conditioner operates in the selected mode when it is turned on. To Cancel the On Timer Press the Note button to cancel the On Timer. [. . . ] x Make sure that you are within 7 meters from the indoor unit. x Check if you are pointing the remote control at the remote control sensor on the right side of the indoor unit. x Replace the remote control batteries if necessary. x Check if the correct operating mode has been selected (Auto, Cool, Heat). [. . . ]