User manual LG GR-412M

[. . . ] <Operating system> · Microsoft Windows XP · Microsoft Windows Vista <Hardware> · Screen resolution 1024 × 768 pixels or more <Browser> · Firefox 2. 0 · Internet Explorer version 6. 0 or version 7. 0 5) Select the "Internet Protocol (TCP/IP)" checkbox, and click [Properties]. Connecting LAN Cable Connect the LAN cable to the connector on the top of the Compliant Manager. 6) Select the "Use the following IP address:" radio button, and set as follows: IP address: 192. 168. 2. *** (***: Excluding 30) Subnet mask: 255. 255. 255. 0 Then click [OK]. [. . . ] Setting IP Address <Windows XP> 1) Log on to the system with the PC administrator's account. (Fig. 1) Fig. 1 7) Close all the windows. 2 (EN) Compliant Manager Network Configuration Guide <Windows Vista> 1) Log on to the system with the PC administrator's account. (Fig. 1) Fig. 1 5) Click [Properties] in the Local Area Connection Status window. (Fig. 4) Fig. 4 3) Click [Network and Sharing Center]. (Fig. 2) Fig. 2 6) Select the "Internet Protocol Version 4 (TCP/ IPv4)" checkbox, and click [Properties]. (Fig. 5) Fig. 5 4) Click "View status" of Local Area Connection. (Fig. 3) Fig. 3 7) Select the "Use the following IP address:" radio button, and set as follows: IP address: 192. 168. 2. *** (***: Excluding 30) Subnet mask: 255. 255. 255. 0. (Fig. 6) Fig. 6 8) Close all the windows. 3 (EN) Compliant Manager Network Configuration Guide 3-2. Setting Browser <Internet Explorer> 1) Start Internet Explorer. Press the (SET) button to determine the data. Change the set data to "38" with the GROUP or button. NOTE) At this time, the entered data of the selected CODE No. Press the (CHECK) button to write the updated data in the memory of the Compliant Manager. * When the data has completely been written in the memory, the CODE No. 4) Press the Reset button to restart the Compliant Manager. * IP address is set during the restart process. When the IP address of the Compliant Manager has been changed, be sure to change the IP address of the client PC to the address in the same segment. Also change the setting of the browser to the IP address of the Compliant Manager. IP address, subnet mask, default gateway, and address setting of the Compliant Manager can be displayed and changed using the following procedures (CODE No. [. . . ] When the IP address of the Compliant Manager has been changed, be sure to change the IP address of the client PC to the address in the same segment. Also change the setting of the browser to the IP address of the Compliant Manager. IP address, subnet mask, default gateway, and address setting of the Compliant Manager can be displayed and changed using the following procedures (CODE No. 10 11 12 13 14 15 16 17 18 19 1A 1B Data Item IP address (MSB) IP address IP address IP address (LSB) Subnet mask (MSB) Subnet mask Subnet mask Subnet mask (LSB) Default gateway (MSB) Default gateway Default gateway Default gateway (LSB) Address setting Factory setting 192 168 2 30 255 255 255 0 0 0 0 0 Setting range 0 to 255 0 to 255 0 to 255 0 to 255 0 to 255 0 to 255 0 to 255 0 to 255 0 to 255 0 to 255 0 to 255 0 to 255 0: Display only 1: Manual setting 2: Auto acquisition (by DHCP) 1C 0 4-1. [. . . ]