User manual LG GR-462SSF

[. . . ] For example, the phone is not allowed to be used in hospital because pacemakers and hearing aids can be affected. Minor interference may affect TVs, radios, PCs, etc. Do not hold the phone in your hand while driving. Do not dismantle phone or battery. ENGLISH Keep the phone in a safe place out of children's reach since it contains the detachable small parts and create a choking hazard. 4 Do not touch the charger with wet hands. For your safety, use ONLY specified ORIGINAL batteries and chargers. Please note: Unusable batteries should be disposed of in accordance with relevant legislation. Only use ORIGINAL accessories to avoid damage to your phone. Emergency call may not be available under all cellular networks. Therefore, you should never depend solely on the phone for essential communications such as medical emergencies. Important Information This user's guide contains important information on the use and operation of this phone. Please read all the information carefully for optimal performance and to prevent any damage to or misuse of the phone. [. . . ] Therefore, in Handsfree menu, you can view the following submenus; - Incoming alert : Ring, Silent - Message alert : Ring Once, Silent ENGLISH 49 Settings [Menu 4] Accessing the Menu You can set the following menus for your convenience and preferences. Alarm clock [Menu 4-1] You can set the alarm to go off at a specified time. Select On and enter the alarm time you want. Select the repeat period : Once, Daily, Weekly, Monthly. Select the alarm tone you want and press [OK]. If you set Alarm clock to Power off alarm, the alarm goes off at a specified time despite the phone is switched off. Date & Time [Menu 4-2] You can set functions relating to the date and time. Date Set date You can set the date of your phone. Date format You can set the Date format. ENGLISH 50 Accessing the Menu Time The phone has its own clock. In this menu you can set the time and select between the 12-hour or 24-hour time formats. Set time: You can set time of your phone in this menu. Time format: Your can select time format between 12-hour or 24-hour. Phone settings [Menu 4-3] You can set functions relating to the phone. Display settings Screen saver You can set screen saver. Call You can set the animation as making a call. Wallpaper You can select background picture in a standby mode. ENGLISH 51 Settings [Menu 4] Accessing the Menu Greeting note If you select yes, this menu allows you select the standby display. Backlight You can set the light-up duration you want whenever you press a key. Two independent phone numbers are registered for the phone. This function provides you with the selection the currently used phone number. If this function is supported by your service provider, the following menu will be displayed. Line 1 : Select Line 1 as the current phone number. Line 2 : Select Line 2 as the current phone number. Security settings [Menu 4-5] PIN code request In this menu, you can set the phone to ask for the PIN code of your SIM card when the phone is switched on. If this function is activated, you'll be requested to enter the PIN code. Press 4 key for direct access or use U and D to enter Settings. Scroll to highlight Security settings menu. Select PIN code request by pressing [Select]. Off : Disable PIN code request. ENGLISH 57 Settings [Menu 4] Accessing the Menu Phone lock You can use security code to avoid unauthorized use of your phone. When you switch on your phone, your phone will request security code always if you set phone lock to "On". If you set phone lock to "Automatic", your phone will request security code only when you change your SIM card. On Off Automatic Automatic key lock When you enable Automatic key lock, keypad will be lock automatically on an idle screen after 25 seconds without any key requesting. On Off Note If you want to lock your phone keypad manually, enter Top menu and press * key. [. . . ] You can swap between calls by selecting the [Options] key then Swap. 2-2 Setting up a Multiparty Call You can connect a call on hold to the currently active call to form a multiparty call by selecting the [Options] key then Multiparty/Join all. 2-3 Putting the Multiparty Call on Hold To put a multiparty call on hold, select the [Options] key then Multiparty/Hold all. 2-4 De-activate the Multiparty Call on Hold To de-activate a multiparty call on hold, select the [Options] key then Multiparty/Join all. 2-5 Adding Calls to the Multiparty Call To join an active call to the held multiparty call, select the [Options] key then Multiparty/Join all. 2-6 Displaying Callers in a Multiparty Call To scroll through the numbers of the callers who make up a multiparty call on the handset screen, press U and D keys. ENGLISH 88 Additional Functions 2-7 Putting a Member of a Multiparty Call on Hold To place one selected caller (whose number is currently displayed on-screen) of a multiparty call on hold, select the [Options] key then Multiparty/Exclude. 2-8 A Private Call in a Multiparty Call To have a private call with one caller of a multiparty call, display the number of the caller you wish to talk to on the screen, then select the [Options] key and Multiparty/Private to put all the other callers on hold. 2-9 Ending a Multiparty Call The currently displayed caller of a multiparty call can be disconnected by pressing the [End] key. To end a multiparty call, press the [Options] key then select Multiparty/End multiparty. Selecting the [Options] key then Multiparty/End all, will end all the active and held calls. 2-10 Explicit Call Transfer (ECT) If you have one caller on hold and another active call, you may connect one call party to another call party and then leave the call. This is done by selecting the Multiparty/Transfer option from the incall menu. ENGLISH 89 Accessories There are various accessories for your mobile phone. [. . . ]