User manual LG GR-572SLF

[. . . ] y Any damages or injuries by using unapproved accessories are not covered by the warranty. note y The accessories supplied with your product may vary depending on the model. y Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. y User should use shielded signal interface cables (RGB cable) with ferrite cores (core in the connector) to maintain standard compliance for the product. 4 ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator y Lighting on: turned on y Lighting off: turned off (Power Button) Button ("CUSTOMIZING SETTINGS" on page 13) E2251VR E2251VQ E1951S E2051S GR-572SLF E2351VR E2351VQ E1951T E2051T E2251T E2351T Connection panel (See p. 10) ASSEMBLING AND PREPARING 5 Button MENU Left First Button Accesses the main menus. (See p. 14) osD LoCKeD/ UnLoCKeD Description ENG ENGLISH This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the Left First Button for several seconds. [. . . ] This adapter can be purchased from Apple. E1951T E2051T E2251T E2351T USING THE MONITOR SET 11 ENG ENGLISH DVI to HDMI connection Transmits the digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with the DVI to HDMI cable as shown the following illustrations. CAUtIon y Connect the signal input cable and tighten it by turning the screws clockwise. y Do not press the screen with your finger for a long time as this may result in temporary distortion on the screen. y Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible. E1951T E2051T E2251T E2351T E2251VR E2351VR E2251VQ E2351VQ 12 USING THE MONITOR SET HDMI connection Transmits the digital video and audio signals from your PC or A/V to the Monitor set. Connect the PC or A/V and the Monitor set with the HDMI cable as shown in the following illustrations. When the HDMI cable is connected, you can listen to the sound through headphones, earphones or an external speaker. Self Image Setting Function Press the power button on the front panel to turn the power on. When monitor power is turned on, the "self Image setting" Function is executed automatically. (Only supported in Analog Mode) ENGLISH ENG E2251VR E2351VR E2251VQ E2351VQ note y "self Image setting" Function. This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. (Only supported in Analog Mode) y `AUto' Function. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. y SUPER SAVING means how much power can be saved using the SUPER ENERGY SAVING function. 16 CUSTOMIZING SETTINGS sUPeR+ ResoLUtIon settings ENGLISH ENG SUPER+ RESOLUTION 1 Press any button on the front of the Monitor set to display the MonItoR setUP OSD menu. the options in the OSD menu. 2 Press the sUPeR+ ResoLUtIon button to display 3 Settheoptionsbypressingorbuttons. 4 Select eXIt to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. NORMAL LOW MEDIUM HIGH EXIT OK EXIT The available SUPER+ RESOLUTION settings are described below. Menu noRMAL LoW MeDIUM HIGH Description Select this for most environments. Optimizes the screen for natural video with soft images. It is effective for still images or video with little movement. Optimizes the screen for sharp video with clear images. It is effective for high resolution video and games. note y sR (sUPeR+ ResoLUtIon) will help remove noise from video. Volume settings (only supported in HDMI) 1 Press any button on the front of the Monitor set to display the MonItoR setUP OSD menu. menu. VOLUME 30 2 Press the VoLUMe button to display the options in the OSD 3 Adjust the VoLUMebypressingorbuttons. 4 Select eXIt to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. EXIT EXIT CUSTOMIZING SETTINGS 17 DUAL MonItoR settings 1 Press any button on the front of the Monitor set to display the MonItoR setUP OSD menu. DUAL PACKAGE DUAL MONITOR ENG ENGLISH 2 Press the DUAL button to display the options in the OSD menu. 3 Settheoptionsbypressingandthenandbuttons. 4 Select eXIt to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. OFF EXTENDED CLONE EXIT The available DUAL MONITOR settings are described below. Menu DUAL MonItoR oFF eXtenDeD CLone Description Turns the Dual Monitor feature off. [. . . ] y Press the AUto button to automatically adjust your display image to the ideal setting. y Check Control Panel Display Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). CAUtIon y Check Control Panel Display Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. [. . . ]