User manual LG GR-620RX

[. . . ] WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: The apparatus shall not be exposed to water, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. 2 Remote Control 1 1 2 2 POWER (subwoofer) Switches subwoofer ON and OFF. PRESET +/Sets the radio frequency channel. [. . . ] AC Power Cord Plug into the power source. SPEAKER Connectors Connect the left and right speakers to these terminals. RESET This button is used to solve the problem as following symptom; · When the power can not on, even if power cord is connected to the outlet. · When the window display does not display. · When the subwoofer does not operate normally. DVD and AUX IN (L/R) jacks Connect the audio output cable from the DVD player and an external unit (Audio system, TV/Monitor, VCR etc. ) to these terminals. 15 11 12 14 10 13 11 13 14 12 * 10 Setting the voltage (OPTIONAL) 15 If your set is equipped with a voltage selector at the back side, be sure to set it to your local power supplied before connecting the AC power cord. 4 Antenna (Aerial) Connections Connect the supplied FM antenna for listening to the radio. FM external antenna (aerial) (not supplied) FM 75 FM wire antenna (supplied) Note: · Be sure to fully extend the FM wire antenna. · After connecting the FM wire antenna, keep it as horizontal as possible. 2. 1 Channel Speakers Connections Connecting to DVD player 1. Connect the Left and Right AUDIO OUT jacks on the DVD Player to the audio left and right in jacks (DVD) on your subwoofer (A). Connect the speakers using the supplied speaker cords by matching the colors of the terminals and those of the cords. To enjoy the sound from the DVD player, press INPUT on the remote control to select source of the subwoofer to DVD. Note: ­ Be sure to match the speaker cord to the appropriate terminal on the components: 3 to 3 and # to #. Adjust the volume by pressing VOL (-)/(+) on the remote control repeatedly. To listen to non-preset radio stations · Use manual or automatic tuning in step 2 on left. · For automatic tuning, press and hold TUNER (-)/(+) on the remote control. To turn off the radio Press POWER to turn the unit off or INPUT on the remote control to select other modes(DVD or AUX). For your reference · If an FM program is noisy Press ST/MN so that "STEREO" disappears in the display window. There will be no stereo effect, but the reception will improve. Press ST/MN again to restore the stereo effect. · To improve reception, reposition the supplied antenna. Note: · Use ST/MN function to switch to mono reception if stereo reception is distorted by noise. Sound Quality Adjustment · You can choose between 4 fixed sound impressions using the EQ button on the remote control. FLAT ROCK POP CLASSIC linear frequency response more bass, more treble less bass, less treble for orchestral music MUTE Press MUTE to temporarily stop the sound. [. . . ] The remote control is too far from the DVD player. There is an obstacle in the path of the remote control and the DVD player. The batteries in the remote control are exhausted. No Power Power switch in the rear panel is turned off. [. . . ]