User manual LG GR-876HQS

[. . . ] The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card TriDef 3D software Program CD / Quick Installation Guide Power Cord Stand Body D-SUB Cable (This signal cable may be attached to this product before shipping out. ) DVI-D Cable (This cable is not included in all countries. ) Stand Base 3D Glasses (Normal type) 3D Glasses (Clip-on type) CAUTION y Do not use any unapproved accessories to ensure the safety and product life span. y Any damages or injuries by using unapproved accessories are not covered by the warranty. NOTE y The accessories supplied with your product may vary depending on the model. y Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. y User should use shielded signal interface cables (RGB cable / DVI-D cable) with ferrite cores to maintain standard compliance for the product. 4 ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator y Lighting On: Turned on y Lighting Off: Turned off (Power Button) Button (See p. 12) AC-IN/ D-SUB DVI-D HDMI Connection panel (See p. 10) ASSEMBLING AND PREPARING 5 Button MENU Accesses the main menus. (See p. 13) OSD LOCKED/ UNLOCKED Description ENG ENGLISH This function allows you to lock the current control settings, so that they cannot be inadvertently changed. [. . . ] menu. 2 Press the MENU button to display the options in the OSD 3 Set the options by pressing the buttons on the front of the Monitor set. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. BRIGHTNESS ORIGINAL RATIO 3D COLOR EFFECT COLOR TEMP PRESET RED GREEN BLUE CONTRAST BLACK LEVEL LANGUAGE SUPER ENEYGY SAVING FACTORY RESET 100 WIDE OFF PRESET WARM 50 50 50 70 HIGH ENGLISH NO EXIT The available program settings are described below. Menu BRIGHTNESS ORIGINAL RATIO Analog Digital HDMI WIDE Switch to full screen mode according to input image signal. ORIGINAL Change the input image signal ratio to original. * This function works only if input resolution is lower than Monitor set ratio (16:9). The picture quality is optimized at the 3D mode. y Depending on the operating system or video card, require to turn on manually. y WARM: Set the screen to warm color temperature (more red). y MEDIUM: Set the screen to medium color temperature. y COOL: Set the screen to cool color temperature (More blue). USER y RED: Set your own red color levels. y GREEN: Set your own green color levels. CONTRAST BLACK LEVEL (Only supported in HDMI mode) LANGUAGE SUPER ENERGY SAVING FACTORY Adjusts the contrast of the screen. Check the signal cable and try again. Do you see an "OUT OF RANGE" message on the screen? Do you see a "CHECK SIGNAL CABLE" message on the screen? Do you see a "OSD LOCKED" message on the screen?Do you see "OSD LOCKED" when you push MENU button? y You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message "OSD UNLOCKED" will appear. Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed. y Press the AUTO button to automatically adjust your display image to the ideal setting. y Press the AUTO button to automatically adjust your display image to the ideal setting. y Press the AUTO button to automatically adjust your display image to the ideal setting. y Check Control Panel Display Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). TROUBLESHOOTING 17 CAUTION ENG ENGLISH y Check Control Panel Display Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. y If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. [. . . ] If you are pregnant, elderly, have heart problems, experience severe nausea or if you are under the influence of alcohol, we recommend that you do not view 3D images. This is because the 3D images can cause disorientation and confusion. Put fragile or breakable objects away when viewing 3D images. Such objects may break, or cause personal injuries when you are startled by the realistic 3D images. [. . . ]