User manual LG GR-L207DTZA

[. . . ] mm) Sound pressure level(Note 2) (High/Mid/Low) PMV Kit (dB(A)) 36/32/28 37/33/28 25 (Polyvinyl choride tube) 37/33/29 Available 40/35/30 44/39/34 A-55 1. Specifications Compact 4-way Cassette (600 x 600) Type Model name Cooling/Heating capacity (Note 1) Power supply Running current Power consumption Starting current Main unit Appearance Ceiling Panel Model Panel color Height Main unit Width Depth Outer dimension Ceiling panel Height Width Depth Main unit Total weight Ceiling panel Heat exchanger Soundproof/Heat-insulating material Fan Fan unit Standard air flow (High/Mid/Low) Motor Air filter Controller Gas side Connecting pipe Liquid side (mm) (mm) O 9. 5 / O 6. 4 / 60Hz MMU(kW) AP0071MH 2. 2/2. 5 AP0091MH 2. 8/3. 2 AP0121MH 3. 6/4. 0 AP0151MH 4. 5/5. 0 AP0181MH 5. 6/6. 3 1 phase 60Hz 220V (Separate power supply for indoor units is required. ) (A) (kW) (A) 0. 27 0. 034 0. 49 0. 29 0. 036 0. 52 0. 30 0. 038 0. 54 0. 33 0. 041 0. 59 0. 41 0. 052 0. 73 Electrical characteristics Zinc hot dipping steel plate *Heat-insulating material attached to only upper plate RBC-UM11PG(W)E Moon white (Munsell/2. 5GY 9. 0/0. 5) 268 575 575 27 700 700 17 3 Finned tube (mm) (mm) (mm) (mm) (mm) (mm) (kg) (kg) Non-flammble insulation Turbo fan (m3/h) 552/462/378 570/468/378 594/504/402 60 Long life filter Remote controller 660/552/468 762/642/522 (W) O 12. 7 / Drain port (Nominal dia. [. . . ] mm) Sound pressure level(Note 2) (High/Mid/Low) PMV Kit (dB(A)) 36/32/28 37/33/28 23 (Polyvinyl choride tube) 37/33/29 40/35/30 44/39/34 Available A-56 2. Dimension Compact 4-way Cassette (600 x 600) Type (MMU-AP***MH) Bottom face of ceiling 105 93 For bracch duct knockout square hole O150 / Bottom face of ceiling O162 / Electric parts box 145. 5 70. 5 207 175 Knockout for flesh air intake O100 / 149 29 64 235 105 235 575 unit external dimension 595 to 660 ceiling open dimension 575 unit external dimension 700 Panel external dimension 525 hanging bolt pitch 320. 5 Model name MMU-AP0071MH GR-L207DTZA MMU-AP0121MH MMU-AP0151MH MMU-AP0181MH Refrigerant pipe (Gas) 0151, 0181MH. . . . . . . . . . . . . . . . . O 9. 5 / Refrigerant pipe (Liquid) O6. 4 / 177 525 hanging bolt pitch 595 to 660 ceiling open dimension 700 Panel external dimension 97. 5 214 105 42 148 256 O162 / 331. 5 4-way air Discharge Cassete Type Arialb1i0c0p34;LG CARRIER CORPORATION Hanging bolt M10 or W3/8 local arrange Drain discharge port 105 70. 5 190. 5 193. 5 93 55 145. 5 134 63 220. 5 268 For branch duct knockout square hole O150 / 142 Ceiling panel 27 Wiring connection port 21 158 120 Bottom face of ceiling 300 Indoor unit 595 to 660 ceiling open dimension Bottom face Drain-up standing-up size of ceiling Stand-up 827. 5 or less Stand-up 850 or less (NOTE) As ABS is used for the drain discharge port of the main unit, the vinyl chloride paste cannot be used. Use the flexible hose (Band fix) included in the package. 368. 5 64 142 Check port ( 450) 1000 or more 15 or more 595 to 660 ceiling open dimension Wired remote controller RBC-AMT31E Simple wired remote controller RBC-AS21E2 Wireless remote controller kit TCB-AX21E2 Weekly timer application RBC-AMT31E and RBC-EXW21E2 Obustacle Space required for installation and servicing Note: All dimensions are in mm. A-57 15 or more 1000 or more 1000 or more 200 3. Electrical current characteristics Compact 4-way Cassette (600 x 600) Type A-58 4. Fresh air intake (Design guide) Compact 4-way Cassette (600 x 600) Type Caution The fresh air shall be conditioned by a heat reclaim ventilator or similar. Ensure the fresh air volume is determined so that mixed suction air and fresh air can maintain the operating temperature. *1. Recommended conditioned air temperature is 12 oC to 30 oC. However, Make a fresh air volume within 20% of standard. Model name Standard air flow MMU(m3/h) AP0071MH 552 AP0091MH 570 AP0121MH 594 AP0151MH 660 AP0181MH 762 Install a filter within the fresh air duct. (Fresh air does not pass through the filter of Indoor unit. ) Insulate the fresh air duct. [. . . ] (Fresh air does not pass through the filter of Indoor unit. ) Insulate the fresh air duct. Electrically connect the fan of the Heat exchanger unit and the Indoor unit to a single isolator. 300 250 Static Pressure (Pa) 200 150 100 50 0 0 2 4 6 8 10 12 14 Fresh Air Volume (m3/h) 16 18 20 22 Indoor unit Duct fan motor Fresh Air Volume Flange Option : _ Inter - lock circuit Connect the driving relay of the duct fan(DC 12V) between 1 and 6 on the indoor P. C. [. . . ]